Updating our Laboratory Calibration / Verification Procedures

  • Thread starter Coleman Donnelly
  • Start date
C

Coleman Donnelly

#1
#1
I am in the process of updating our labs calibration procedures... In the interest of thoroughness is there anywhere i can go to find existing samples/examples of acceptable calibration procedures within the TS16949 scope...
 
SQCpack - Communicate Quality Metrics
Elsmar Forum Sponsor
Q

qusys

Trusted Information Resource
#2
#2
Re: Calibration/verification procedures

Hi Coleman,
I think that there are not any customized cal lab procedures, good for ISO TS.
ISO TS stands only for lab scope, etc. etc. as per related clause.
The same thing if the organization uses external labs as supplier.
The organization should prepare procedures or manual where there are inserted the procedures for lab, how it manages standards, the uncertainty of the measurement, gauge R & R , management of the reports and documentation, competences atc.
I do not know if I centered the point.
 
A

AndyN

Moved On
#3
#3
Re: Calibration/verification procedures

Coleman Donnelly said:
I am in the process of updating our labs calibration procedures... In the interest of thoroughness is there anywhere i can go to find existing samples/examples of acceptable calibration procedures within the TS16949 scope...
Click to expand...
Coleman:

There are many many standard, industry-wide calibration procedures for many types of equipment - see the GIDEP website. However, what do you mean 'TS 16949 scope'?
 
C

Coleman Donnelly

#4
#4
Re: Calibration/verification procedures

I dont believe that i qualify to become a member of the GIDEP since i do not supply the goverment with product nor do i work for them...

I want to make sure that a procedure that i am looking at satisfies the requirements of the TS standard.
 
Jen Kirley

Jen Kirley

Quality and Auditing Expert
Staff member
Admin
#5
#5
Re: Calibration/verification procedures

I did a search for attachments using the green Post Attachments button in the header and came up with this list. Maybe there's something in there that will help.
 
A

AndyN

Moved On
#6
#6
Re: Calibration/verification procedures

Coleman Donnelly said:
I dont believe that i qualify to become a member of the GIDEP since i do not supply the goverment with product nor do i work for them...

I want to make sure that a procedure that i am looking at satisfies the requirements of the TS standard.
Click to expand...
All you have to do to satisfy GIDEP is to be able to write that your organization gained some benefit ($$$) from using their service - nothing to do with being a supplier to the Gov. unless they've changed it since I last looked....

The procedure you're looking for is the Calibration System Management Procedure? How you run your calibration program?
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
T Re-PPAP after updating CMM program? Manufacturing and Related Processes 9
B Timeframe for updating QMS / transitioning from ISO 14971:2012 to ISO 14971:2019 ISO 14971 - Medical Device Risk Management 10
H Updating Quality Manual to API Q1 Service Industry Specific Topics 6
Z Minitab - Updating Graph with specific data points Using Minitab Software 2
N Updating the website of the manufacturer EU Medical Device Regulations 1
A Technical File - Updating Applied Standards EU Medical Device Regulations 4
A What ISO 9001:2015 clause could be used to write nonconformance for not updating licensed driver list? General Auditing Discussions 8
N Updating QM to 13485:2016 - We do not make medical devices ISO 13485:2016 - Medical Device Quality Management Systems 1
B Site Move - Question about Updating Product Labels 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
O Updating "opportunities" resulting from Corrective Actions Nonconformance and Corrective Action 2
N Updating class I device IFU with instructions to use class II cleared device 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
V Periodic review criteria for reviewing/updating SOPs US Food and Drug Administration (FDA) 1
T Design Changes - Updating the Design and Development File EU Medical Device Regulations 5
L Clinical Evaluation Report Updating Procedure Other Medical Device Related Standards 5
A Changing a Form Template & Updating Records ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
M AS9100D - Updating Scope Exclusions AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
E Updating DHF (Design History File) to include Alternative Component 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
W ISO9001:2015 - Clause 7.5.2 - Requirements for Creating & Updating Documents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
Q Actions Taken - Updating a FMEA for the addition of a downstream poke yoke FMEA and Control Plans 3
I NCR for Customer not updating their drawings AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 14
P Updating a Medical Device's Intended Use Other US Medical Device Regulations 2
N Updating Job Titles - Does This Mean There Needs to Be a rev change? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
shimonv Updating Safety Test Report when changing component supplier IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
K Updating Outdated Calibration Procedures Document Control Systems, Procedures, Forms and Templates 2
J Is the SFDA in China in the process of updating their Medical Device Regulations ISO 13485:2016 - Medical Device Quality Management Systems 3
T Design & Development in Updating Machines and Equipment - ISO 9001 Help Design and Development of Products and Processes 4
F Updating a Quality Manual from ISO 9001 to ISO TS 16949 - Process Mapping IATF 16949 - Automotive Quality Systems Standard 2
B Requirement for Updating Medical Device Software (Firmware) in the Field 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
S IPC 620 updating from Class 1 to Class 3 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
C Updating (Revising) Documents with a New Logo Document Control Systems, Procedures, Forms and Templates 3
O Sum of Cpk - Updating Product Tolerances Capability, Accuracy and Stability - Processes, Machines, etc. 6
M Updating a Quality Manual from ISO 9001:2000 to ISO 9001:2008 Quality Management System (QMS) Manuals 57
B Updating from ISO 9001:2000 to ISO 9001:2008 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
R Standard Relevance & Updating - ASME B&PVC Various Other Specifications, Standards, and related Requirements 4
T Updating to ISO 9001:2008 - I need to add section 7.3 Design and Development ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 28
J Declaration of Conformity - Updating the DofC to MMD 2007/47/EC EU Medical Device Regulations 4
J ISO/AS Surveillance Audit - Minor for not updating my QA Manual to ISO 9001:2008 Quality Management System (QMS) Manuals 95
V Updating Quality Manual - Adding the word Statutory in front of laws and regulations Quality Management System (QMS) Manuals 3
M Updating Certificate of Foreign Government (CFG's) Other US Medical Device Regulations 18
ScottK How is this for extremes in updating to the ISO9001:2008 rev ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
I Updating Lead Auditor Certifications to ISO 9001:2008 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
A FDA - Registration & Listing Updating + when Purchasing another Company 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
K Updating Procedures because they are bland and wordy Document Control Systems, Procedures, Forms and Templates 12
C Updating the IPC1752 info RoHS, REACH, ELV, IMDS and Restricted Substances 3
W Standards Updating Service? Current Revision Level of Standards Other ISO and International Standards and European Regulations 11
J Updating a PFMEA (Process FMEA) after a Process Failure FMEA and Control Plans 3
S Requirements for Updating a Medical Device Technical File EU Medical Device Regulations 13
D Updating Training Procedures when other documents change - Over Kill? Training - Internal, External, Online and Distance Learning 14
C ISO 13485 Gap Analysis Checklist - Updating ISO 13485 from the 1996 standard to 2003 ISO 13485:2016 - Medical Device Quality Management Systems 2
B Tips on updating our Quality Systems Manual from ISO 9001:1994 to ISO 9001:2000 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8

Similar threads

Top Bottom