Updating Quality Manual - Adding the word Statutory in front of laws and regulations

V

viren

#1
While updating the quality manual i got a doubt while adding the word statutory infront of law and regulations, its a bit doubtful that whether statutory word to be added infront of regulatory and legal words or not, i know it looks simple but for me its a bit confusing as both words means nearly same and i dont want to get a NC ( though a minor) from auditor becaue of this. Because in the manual at two places we have the wording laws and regulations and at other places its like "legal and regulatory requirements" so i would like to seek some help from seniors that whether should i use the statutory infront of legal and regulatory requirements or not?

Regards,

Thanks in advance
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Re: Updating quality manual

While updating the quality manual i got a doubt while adding the word statutory infront of law and regulations, its a bit doubtful that whether statutory word to be added infront of regulatory and legal words or not, i know it looks simple but for me its a bit confusing as both words means nearly same and i dont want to get a NC ( though a minor) from auditor becaue of this. Because in the manual at two places we have the wording laws and regulations and at other places its like "legal and regulatory requirements" so i would like to seek some help from seniors that whether should i use the statutory infront of legal and regulatory requirements or not?

Regards,

Thanks in advance
The sequence and use of wording is not important. You over-analyze this.
You can even state: "in accordance with the requirements." See? Very easy.

Stijloor.
 

Ajit Basrur

Staff member
Admin
#3
Re: Updating quality manual

While updating the quality manual i got a doubt while adding the word statutory infront of law and regulations, its a bit doubtful that whether statutory word to be added infront of regulatory and legal words or not, i know it looks simple but for me its a bit confusing as both words means nearly same and i dont want to get a NC ( though a minor) from auditor becaue of this. Because in the manual at two places we have the wording laws and regulations and at other places its like "legal and regulatory requirements" so i would like to seek some help from seniors that whether should i use the statutory infront of legal and regulatory requirements or not?

Regards,

Thanks in advance
Hi Viren,

Firstly, I dont think that the auditor will give you a NC for this :D

Pl refer to this old thread that we have on related subject - Statutory & Regulatory Requirements - Comply with applicable laws - 7.2.1 (c)
 

Randy

Super Moderator
#4
Re: Updating Quality Manual - Adding the word Statutory in front of laws and regulati

Just call them whatever they are called in your country.
 
Thread starter Similar threads Forum Replies Date
H Updating Quality Manual to API Q1 Service Industry Specific Topics 6
F Updating a Quality Manual from ISO 9001 to ISO TS 16949 - Process Mapping IATF 16949 - Automotive Quality Systems Standard 2
M Updating a Quality Manual from ISO 9001:2000 to ISO 9001:2008 Quality Management System (QMS) Manuals 57
B Tips on updating our Quality Systems Manual from ISO 9001:1994 to ISO 9001:2000 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
T Re-PPAP after updating CMM program? Manufacturing and Related Processes 9
B Timeframe for updating QMS / transitioning from ISO 14971:2012 to ISO 14971:2019 ISO 14971 - Medical Device Risk Management 10
Z Minitab - Updating Graph with specific data points Using Minitab Software 2
N Updating the website of the manufacturer EU Medical Device Regulations 1
A Technical File - Updating Applied Standards EU Medical Device Regulations 4
A What ISO 9001:2015 clause could be used to write nonconformance for not updating licensed driver list? General Auditing Discussions 8
N Updating QM to 13485:2016 - We do not make medical devices ISO 13485:2016 - Medical Device Quality Management Systems 1
B Site Move - Question about Updating Product Labels 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
O Updating "opportunities" resulting from Corrective Actions Nonconformance and Corrective Action 2
N Updating class I device IFU with instructions to use class II cleared device 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
V Periodic review criteria for reviewing/updating SOPs US Food and Drug Administration (FDA) 1
T Design Changes - Updating the Design and Development File EU Medical Device Regulations 5
L Clinical Evaluation Report Updating Procedure Other Medical Device Related Standards 5
A Changing a Form Template & Updating Records ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
M AS9100D - Updating Scope Exclusions AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
E Updating DHF (Design History File) to include Alternative Component 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
W ISO9001:2015 - Clause 7.5.2 - Requirements for Creating & Updating Documents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
Q Actions Taken - Updating a FMEA for the addition of a downstream poke yoke FMEA and Control Plans 3
I NCR for Customer not updating their drawings AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 14
P Updating a Medical Device's Intended Use Other US Medical Device Regulations 2
N Updating Job Titles - Does This Mean There Needs to Be a rev change? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
shimonv Updating Safety Test Report when changing component supplier IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
K Updating Outdated Calibration Procedures Document Control Systems, Procedures, Forms and Templates 2
J Is the SFDA in China in the process of updating their Medical Device Regulations ISO 13485:2016 - Medical Device Quality Management Systems 3
T Design & Development in Updating Machines and Equipment - ISO 9001 Help Design and Development of Products and Processes 4
B Requirement for Updating Medical Device Software (Firmware) in the Field 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
S IPC 620 updating from Class 1 to Class 3 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
C Updating (Revising) Documents with a New Logo Document Control Systems, Procedures, Forms and Templates 3
O Sum of Cpk - Updating Product Tolerances Capability, Accuracy and Stability - Processes, Machines, etc. 6
B Updating from ISO 9001:2000 to ISO 9001:2008 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
R Standard Relevance & Updating - ASME B&PVC Various Other Specifications, Standards, and related Requirements 4
T Updating to ISO 9001:2008 - I need to add section 7.3 Design and Development ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 28
J Declaration of Conformity - Updating the DofC to MMD 2007/47/EC EU Medical Device Regulations 4
C Updating our Laboratory Calibration / Verification Procedures IATF 16949 - Automotive Quality Systems Standard 5
J ISO/AS Surveillance Audit - Minor for not updating my QA Manual to ISO 9001:2008 Quality Management System (QMS) Manuals 95
M Updating Certificate of Foreign Government (CFG's) Other US Medical Device Regulations 18
ScottK How is this for extremes in updating to the ISO9001:2008 rev ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
I Updating Lead Auditor Certifications to ISO 9001:2008 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
A FDA - Registration & Listing Updating + when Purchasing another Company 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
K Updating Procedures because they are bland and wordy Document Control Systems, Procedures, Forms and Templates 12
C Updating the IPC1752 info RoHS, REACH, ELV, IMDS and Restricted Substances 3
W Standards Updating Service? Current Revision Level of Standards Other ISO and International Standards and European Regulations 11
J Updating a PFMEA (Process FMEA) after a Process Failure FMEA and Control Plans 3
S Requirements for Updating a Medical Device Technical File EU Medical Device Regulations 11
D Updating Training Procedures when other documents change - Over Kill? Training - Internal, External, Online and Distance Learning 14
C ISO 13485 Gap Analysis Checklist - Updating ISO 13485 from the 1996 standard to 2003 ISO 13485:2016 - Medical Device Quality Management Systems 2

Similar threads

Top Bottom