Use part of high risk device for establishing low risk device

#1
We are planning to take part of an already CE-mark class IIb device (its energy converting part=motor)
to drive a new class I device?
The new device shall undergo risk analysis, design input and V&V full testing for making sure it is safe and perform its intended use properly.
Do we mis any regulatory requirement which restrict us to do such a combination?
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
J Meeting Feasibility Requirement - High number of part quotes IATF 16949 - Automotive Quality Systems Standard 6
S Tensile made critical characteristic, but Cpk? High rate of rejection in a part Capability, Accuracy and Stability - Processes, Machines, etc. 9
E Performing a GRR when you get multiple readings over time per part. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
K 13485 do e-signatures have to be 21 CFR Part 11 compliant? ISO 13485:2016 - Medical Device Quality Management Systems 7
I Restricting scope to one part number for one customer IATF 16949 - Automotive Quality Systems Standard 6
P Certifying Staff leaving Part-145 organisation EASA and JAA Aviation Standards and Requirements 2
A Industry standard for stamped part Various Other Specifications, Standards, and related Requirements 2
P Can credentials (ID/PW) used to login be the same as when applying Electronic Signature (Part 11) US Food and Drug Administration (FDA) 2
M Mains on Patient with Part Attached to Protective Earth in Patient Area IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
M Documentation accompanying an aerospace part AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
H Better to retain previous made parts or one part that is perfect Reliability Analysis - Predictions, Testing and Standards 2
T Accreditations as part of 9001 - Quality checks on your company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
T Customer Rejecting Part for Basic Dimension Inspection, Prints (Drawings), Testing, Sampling and Related Topics 16
H Should we stop inspecting a part if its never been rejected? Reliability Analysis - Predictions, Testing and Standards 6
M MSA - Dealing with inherent within-part variation in assemblies Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
C Multiple Part Numbers, IMDS RoHS, REACH, ELV, IMDS and Restricted Substances 2
J IEC 60601 Applied Part - Probes intended to be covered by sheaths IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Saline Infusion- Applied Part, Patient Connection IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
D 21 CFR Part 11 Assessment (Fully Compliant or Not) Qualification and Validation (including 21 CFR Part 11) 9
S Comparing measurement results for a part from two ring gage General Measurement Device and Calibration Topics 3
PQ Systems SQCpack Tech Tuesday Webinar 3-Part Series Using SQCpack Software 0
E Biocompatibility testing of our applied part seems redundant Other Medical Device Related Standards 2
A APPLIED vs ACCESSIBLE PART IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
PQ Systems Device Integration with SQCpack - 3 Part Series Using SQCpack Software 0
PQ Systems Gage R&R - 3 Part Series Using GAGEpack Software 0
PQ Systems GAGEpack Tech Tuesday - 4 part series Using GAGEpack Software 0
PQ Systems GAGEpack Tech Tuesday - 3 part series Using GAGEpack Software 0
D Is an ethernet port part of the User Interface IEC 62304 - Medical Device Software Life Cycle Processes 5
C DV/PV Test Part Storage IATF 16949 - Automotive Quality Systems Standard 9
D IATF Requirements if remote plant has no interface with OEMs who are part of IATF? IATF 16949 - Automotive Quality Systems Standard 6
W Classes and Applied Part IEC60601 Electromedical Equipment IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
E How to test 8.7.4.7 d) ? What "not protectively earthed accessible part" means? IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
Anonymous16-2 Sinks and Sanitation - 21 CFR Part 111 Miscellaneous Environmental Standards and EMS Related Discussions 4
O PPAP'ed part manufacturer has discontinued production Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 7
N Reworked Finished Goods (FG) - Part of CoPQ? Misc. Quality Assurance and Business Systems Related Topics 3
O Should a Covid vaccine and testing policy be included as part of ISO9001 or AS9100 risk management? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
S 21 CFR part 11 version differences Qualification and Validation (including 21 CFR Part 11) 1
A Is computing Hardware part of the IVD CE Marking (Conformité Européene) / CB Scheme 3
abrego44 AIAG PPAP manual for service part APQP and PPAP 5
M Reference part calibration or verification General Measurement Device and Calibration Topics 12
cgaro62 Using internal audits as part of document reviews Document Control Systems, Procedures, Forms and Templates 21
A Dielectric withstand of applied part IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
M List of FAA Part 145 Repair Stations in MS Excel format? Federal Aviation Administration (FAA) Standards and Requirements 0
K 10 parts, 4 operators, 3 replications and each part has 3 location to measure. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
L FDA & 21 CFR Part 11 Medical Device and FDA Regulations and Standards News 19
Q Can I use Cpk to compare if one part is usable in another part? Capability, Accuracy and Stability - Processes, Machines, etc. 5
I PFD (Process Flow Diagram) approach. Setup details as part of PFD? APQP and PPAP 5
B Combat Low Part to Part Variation in GRR Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
C Quality Manager as part of Management - 13485 ISO 13485:2016 - Medical Device Quality Management Systems 9
A Complaint review as part of the complaint handling process? ISO 13485:2016 - Medical Device Quality Management Systems 3

Similar threads

Top Bottom