SBS - The Best Value in QMS software

Validation of new machine (second machine of the same type)

Kid006

Starting to get Involved
#1
Greetings

Its my first time working with CNC cotouring machines, im running a validation for a new machine which is the second of the same supplier, model, type, software version etc.
IQ has been completed and im writting the OQ protocol, there's already an engineering study for the cutting speed settings for the other machine.
Im short of time and i think that will take a lot of time to create a new engineering study for the speed settings of the new machine.
Both machines are capable to reproduce the same preloaded cutting route
I already made a verification run to check the cutting speed.
note: the only parameter is the cutting speed

Is it valid to used as reference the engineering study of the old machine in the new machine OQ and PQ protocols?
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
H Software Validation for FFS Packaging Machine Qualification and Validation (including 21 CFR Part 11) 1
J Extent of Validation - New machine installed in manufacturing ISO 13485:2016 - Medical Device Quality Management Systems 8
P Injection Molding Machine Validation Scope Capability, Accuracy and Stability - Processes, Machines, etc. 6
A Machine Relocation within Facility - Is re-validation required? ISO 13485:2016 - Medical Device Quality Management Systems 8
A Test Method Validation on Elongation Machine General Measurement Device and Calibration Topics 0
M Injection Molding Machine Software Validation Calibration and Metrology Software and Hardware 2
I Cleaning Validation for Durapore Tape Cutting Machine EU Medical Device Regulations 2
M Supplier Moulding Machine Validation Detergents and Lubricants Supplier Quality Assurance and other Supplier Issues 2
L IQ and OQ Validation for the Filling Machine Capability, Accuracy and Stability - Processes, Machines, etc. 5
G Packaging Re-Validation - Sealer machine broke down or was changed to a new one Other ISO and International Standards and European Regulations 11
V Validation of Washing and Degreasing (Solvent Washer) for Precision Machine Parts Design and Development of Products and Processes 9
B Validation of IVD - Existing Product produced with New Machine ISO 13485:2016 - Medical Device Quality Management Systems 6
R Microbiological Cleaning Validation of Tablet Press Machine Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 6
P CNC machine validation for Contract Manufacturer of medical devices Qualification and Validation (including 21 CFR Part 11) 1
I CNC Machine Validation Requirement ISO 13485:2016 - Medical Device Quality Management Systems 20
V "Calibration" or "Validation with CMM machine" General Measurement Device and Calibration Topics 3
C Coordinate Measuring Machine Software Validation Process Software Quality Assurance 5
N Validation question - When our maintaince department adjusts a station or machine Statistical Analysis Tools, Techniques and SPC 1
M Is validation required when consumables are changed Qualification and Validation (including 21 CFR Part 11) 3
C 8.3.4 Verification and Validation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
W Transport validation Qualification and Validation (including 21 CFR Part 11) 12
mustomutlu Process Validation Final Report Other Medical Device and Orthopedic Related Topics 2
P Software verification and validation procedure IEC 62304 - Medical Device Software Life Cycle Processes 6
Y SaMD Verification and Validation SOP and Plan IEC 62304 - Medical Device Software Life Cycle Processes 6
C Spreadsheet Validation and Release Qualification and Validation (including 21 CFR Part 11) 2
M Packing Validation & Accelerated Aging Test ISO 13485:2016 - Medical Device Quality Management Systems 2
M Sterile packing validation tests to be performed and protocol Other Medical Device and Orthopedic Related Topics 1
S OEM full range calibrations vs Validation special test points Medical Device and FDA Regulations and Standards News 0
Q ISO 13485 7.5.6 Validation - Off the shelf Software ISO 13485:2016 - Medical Device Quality Management Systems 3
M ERP / QMS related software standards for Validation IEC 62304 - Medical Device Software Life Cycle Processes 6
C ISO 19227 Validation Cost Other Medical Device Related Standards 2
A CNC Mill and Lathe - Validation Manufacturing and Related Processes 2
N Example for design and development planning,input,output,review,verification,validation and transfer Misc. Quality Assurance and Business Systems Related Topics 4
N Sterilization Protocol Change in Validation Process and further impacts ISO 13485:2016 - Medical Device Quality Management Systems 1
B Oracle Cloud ERP Validation during Quarterly Patch ISO 13485:2016 - Medical Device Quality Management Systems 1
D Software validation team Misc. Quality Assurance and Business Systems Related Topics 3
W LTPD, AQL, Ppk and Cpk validation sampling plan table Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
J Validation Sample Size for Tray Seal Qualification and Validation (including 21 CFR Part 11) 3
F AS9100 - Validation, FAIR's, ITAR and Sub-Contracting AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
R PCBA process validation Qualification and Validation (including 21 CFR Part 11) 2
A ISO 17025 - Methods validation and clients ISO 17025 related Discussions 3
S Sterilization validation after changing sterilization process provider Qualification and Validation (including 21 CFR Part 11) 3
B Sterilization Validation Plan Other Medical Device Related Standards 3
D Difference between Test Method Validation and Gage R&R Qualification and Validation (including 21 CFR Part 11) 18
T Laboratory Verification after validation ISO 17025 related Discussions 3
silentmonkey Rationalising the level of effort and depth of software validation based on risk ISO 13485:2016 - Medical Device Quality Management Systems 10
D Questions regarding process validation ISO 13485:2016 - Medical Device Quality Management Systems 6
Y We found out we have been using a equipment without validation for past 4 years Quality Manager and Management Related Issues 6
Z Is IQ necessary for laser marking validation? EU Medical Device Regulations 3
E 13485:2016, Sections 4.1.6, 7.5.6 and 7.6 - Validation of Software - Need some Advice please ISO 13485:2016 - Medical Device Quality Management Systems 3

Similar threads

Top Bottom