Veeva installation and the Loader Tool

Imecoli

Starting to get Involved
#1
I hope this is posted in the correct forum.

We are in the process of implementing Veeva for Qual docs and if anyone out there has migrated their documents into the system I am looking for some advice.

They provide an up-loader tool and say that you should attend a training (4 -6 hours) for the usage and that is at an additional cost. I have used similar tools with other systems and it was pretty easy with a 15 minute conversation on how to use the tool from the vendor. A lot of the training we have received so far has been very verbose and ineffective and I was curious if anyone else out there is familiar with the system and has used the tool and has any advice. The other options are to upload each document manually, one at a time, or pay them outright for the migration. We have about 500 documents. Still waiting to hear what the costs will be.

Thank you
 
Elsmar Forum Sponsor

shruti_hiregange

Involved In Discussions
#2
Hi,

Hope you are doing well! I have used a document management system (DMS) by Veeva. I am not so sure the up-loader, because I was managing the entire transition from our earlier DMS to Veeva and all of it was done manually (uploading each document one by one), which is quite laborious. But I do understand that there is a process of "auto-migration" as well, which should help as you mention that you have 500 documents. And depending on the role (system admin/business admin) of the individual doing the transition, bulk actions are available as well.
Hope that helps!

Regards,
Shruti.
 
Last edited:

Imecoli

Starting to get Involved
#3
Thank you for the response Shruti, apologies for the delayed thanks.
I currently am using the laborious method of migration. How is the system working for you? I am finding several areas that are not executing as described by the vendor.
 

shruti_hiregange

Involved In Discussions
#4
Hello,

The system works fine for me once we finished the transition into Veeva. We have several enhancements happening quite often, so most of our concerns would get resolved once the enhancements went live into the production environment. Let me know the areas where you are facing issues, I can help wherever possible :)
 
Thread starter Similar threads Forum Replies Date
JoCam Rental, service & installation - regulatory requirements EU Medical Device Regulations 2
S Quality management system (Well head installation & maintenance) Quality Management System (QMS) Manuals 5
J Installation Qualification (IQ) and Operational Qualification (OQ) for Laser Marking 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
GURU SDI Leak Testing - O-ring installation in the groove of Bore ID Problem Solving, Root Cause Fault and Failure Analysis 4
A Best Method of Auditing an Installation Process at a client job-site ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
S Do you test the download and installation of a mobile medical device app? Software Quality Assurance 6
Q UDI and Standalone Software - UDI per installation? Other Medical Device Related Standards 6
A What is the definition of Installation that requires Record Keeping vs Set-up 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
L Medical Device Installation Records from Third Party Installer 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
J FDA Microscope IQ (Installation Qualification) Requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S ISO 13485 Installation Activities 7.5.1.2.2 ISO 13485:2016 - Medical Device Quality Management Systems 4
G Nonconformity Reporting at Installation Sites Service Industry Specific Topics 8
K Supplier or outsourced? Medical Device installation, sales, training Other ISO and International Standards and European Regulations 7
N Definition of Large-Scale Fixed Installation per the RoHS2 Directive EU Medical Device Regulations 3
E IEC 62304 5.2.2 f - Installation and acceptance of device software IEC 62304 - Medical Device Software Life Cycle Processes 1
S Barcode Scanner IOPQ (Installation/Operational/Performance Qualification) Requirement Qualification and Validation (including 21 CFR Part 11) 9
S Time & Motion Study - Dish TV Installation Quality Tools, Improvement and Analysis 4
J ISO 9001 Audit Questions relating to Installation of Lifts ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
T Office Relocation Installation Inspection Sheet Document Control Systems, Procedures, Forms and Templates 5
S ETSO, TSO and EASA Form 1 - Do I need the ETSO approval for the installation? EASA and JAA Aviation Standards and Requirements 3
S SW (Software) - Customer vs. Company Installation 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
T Site Installation Inspection and Testing for a HVAC Contractor Service Industry Specific Topics 2
W Packaging / Heat Sealer Validation - IOQ (Installation/Operational Qualification) Qualification and Validation (including 21 CFR Part 11) 15
A Installation and Validation Procedure for IT Laboratory ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
K Starrett RGC4040-24 CMM User and Installation Manual General Measurement Device and Calibration Topics 2
W IQ, OQ, PQ (installation, operational & performance qualification) compared to PPAP ISO 13485:2016 - Medical Device Quality Management Systems 5
H Basic questions about Installation, Operational & Performance Qualification - PCBA Qualification and Validation (including 21 CFR Part 11) 11
R Is there a Specification for safety wire installation - Aerospace, SAE or otherwise AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
D Tips/Documentation samples required for X-ray Film Processor Installation needed. ISO 13485:2016 - Medical Device Quality Management Systems 1
T Installation Requirements for Bench Top Device ISO 13485:2016 - Medical Device Quality Management Systems 1
MarilynJ6354 Service & Installation Parts Identification - Install equipment at a customer's site Service Industry Specific Topics 6
C Installation Document that meet NFPA 70 & 72 Various Other Specifications, Standards, and related Requirements 3
C NFPA 72 and NFPA 72 Standards - Electrical Installation and Fire Alarm Systems Various Other Specifications, Standards, and related Requirements 3
Q IQ, OQ & PQ (Installation, Operation, and Performance Qualifications) on a CMM ISO 13485:2016 - Medical Device Quality Management Systems 2
C ISO 13485 and IQ (Installation Qualification), OQ (Operational Qualification) ISO 13485:2016 - Medical Device Quality Management Systems 30
C Generate IQ, OQ & PQ (installation/operational/performance qualification) Report Document Control Systems, Procedures, Forms and Templates 11
Q Software installation issues After Work and Weekend Discussion Topics 3
I Medical Gases Installation - Can be classified as MD and ISO 13485 certificated? ISO 13485:2016 - Medical Device Quality Management Systems 5
S Quality Standards on Refrigeration (Installation) field IATF 16949 - Automotive Quality Systems Standard 3
C Auditing of Installation of Product at Customers Sites General Auditing Discussions 6
M Seeking: Good process definition (map or whatever) for an installation business ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
Q How to Calibrate Software - Microcontroller software installation General Measurement Device and Calibration Topics 1
F 4.9 Installation & Servicing Processes QS-9000 - American Automotive Manufacturers Standard 1
B Refurbisher (re-loader) of OEM X-Ray Tubes - Marketing to Canada ISO 13485:2016 - Medical Device Quality Management Systems 1

Similar threads

Top Bottom