Visual Standard for Watch Industry

  • Thread starter phyllishwl - 2005
  • Start date
P

phyllishwl - 2005

#1
#1
Hi all,

I am working in a watch industry. I am responsible to develop the visual standard for inspection, globally. Our mother company(the customer) has given some guidelines in terms of technology(i.e. injection moulded, Metal¡Ketc), and defect type(i.e. scratch, spot¡Ketc). However, not specify the acceptance criteria in the document.

I was instructed to hand on the standard on next Wed, but I don¡¦t know how to start. Any format, standard or reference for visual standard? Anyone can help?

Thank you so so so much for your reading and help!

Phyllis :<
 
SQCpack - Communicate Quality Metrics
Elsmar Forum Sponsor
T

Teknow

#2
#2
Hopefully the attached file might give you some ideas on where to start - visual inspection / acceptance needs to be have any subjectivity removed. "Master" samples signed off by the customer are also a good idea!
;)
 

Attachments

O

okamoto

Registered
#3
#3
Teknow said:
Hopefully the attached file might give you some ideas on where to start - visual inspection / acceptance needs to be have any subjectivity removed. "Master" samples signed off by the customer are also a good idea!
;)
Click to expand...
:bigwave:
Thank you for your post, Is there a same requirements at VW group?
:thanx:
 
Last edited:
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
A Cosmetic Spec - Convincing Management Visual Inspection Standard is Necessary Manufacturing and Related Processes 5
K Is there any specific Standard on visual defects for extrusion and machined parts ? Quality Tools, Improvement and Analysis 6
C Standard for Lighting for Visual Control at Work Stations IATF 16949 - Automotive Quality Systems Standard 7
A Visual Inspection Frequency and is there any standard that for visual attributes? AQL - Acceptable Quality Level 2
A Blasting Visual Standard Validation - Site Acceptance Test required Other Medical Device and Orthopedic Related Topics 1
D Visual Inspection Standard Specification for Thick Film Hybrid Substrates Reliability Analysis - Predictions, Testing and Standards 3
A QC (Quality Control) Visual Standard for Medical Device Product ISO 13485:2016 - Medical Device Quality Management Systems 7
Q Does a gage used for a visual verification need to be calibrated? Manufacturing and Related Processes 7
J Justification for visual inspection ISO 13485:2016 - Medical Device Quality Management Systems 3
E Visual Management Boards & QMS ISO 13485:2016 - Medical Device Quality Management Systems 8
M Cameras and Visual Inspection Equipment General Measurement Device and Calibration Topics 3
C KAPPA index Reference Value for Visual inspection IATF 16949 - Automotive Quality Systems Standard 1
I Overwhelmed with attribute MSA requirement for visual inspection IATF 16949 - Automotive Quality Systems Standard 11
K Visual Inspection Effectiveness Inspection, Prints (Drawings), Testing, Sampling and Related Topics 16
P Missing 1m visual alarm signal in case of software/display failure, mitigation? ISO 14971 - Medical Device Risk Management 3
P MSA study for visual system with artifical inteligence Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
S PPAP Progress - Visual Status Board APQP and PPAP 0
Marc Visual Inspection - Color Vision Coffee Break and Water Cooler Discussions 15
S Need Assistance in Visual Inspection - Tiny electronic components AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
I Best visual description for SOPs? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
John Predmore What size pinhole can be reliably detected using visual inspection? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
A Visual acuity test - Product to have passed a jaeger test Human Factors and Ergonomics in Engineering 6
L Off the Shelf Software VISUAL ERP system ISO 13485:2016 - Medical Device Quality Management Systems 1
S Agreement for allowance for visual criteria after submission APQP and PPAP 1
C EPA NPDES VISUAL ASSESSMENT - No Significant Storm Event ISO 14001:2015 Specific Discussions 0
R Can a Attribute Study be considered a Visual Inspection? Reliability Analysis - Predictions, Testing and Standards 6
P Gage R&R on Visual Inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 15
B Gage R & R on Visual Inspection using the Cross Tabulation Method IATF 16949 - Automotive Quality Systems Standard 4
L IATF 16949 7.1.5.1.1 Measurement System Analysis (MSA) - Visual Inspection IATF 16949 - Automotive Quality Systems Standard 14
S Do you use audio-visual streaming during FDA inspection? US Food and Drug Administration (FDA) 3
T Customer Requirement for Sorting - Visual Defect on Plastic Part IATF 16949 - Automotive Quality Systems Standard 9
R Visual Attribute Inspector Capability and KAPPA Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
C Visual Presentation of Supplier Score - .xls Spreadsheet Excel .xls Spreadsheet Templates and Tools 1
D Visual Inspection with No Visual Reference General Measurement Device and Calibration Topics 2
M Use of Excel and VBA (visual basic for applications) in quality systems Excel .xls Spreadsheet Templates and Tools 3
C What are the Visual Requirements for Borescope Inspectors? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S Attribute G&R for all Visual Controls in Control Plan Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
E Reference Only on Gage or Visual Aid Calibration Frequency (Interval) 4
N How to reduce RPN of Visual Inspection Process FMEA and Control Plans 6
alonFAI Finished PCB Final Visual Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
N Visual Inspection, Terminology for Process (Tin Soldiering?) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
G Visual Inspection of Machined Parts - Best Methods Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
L VT (Visual Testing) NDT Training Certification Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Visual Defect during Validation Process Design and Development of Products and Processes 6
S Visual Inspection Galvanized Attribute Study Quality Tools, Improvement and Analysis 2
Q Please suggest how to improve Cosmetic Visual Inspections Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
A Cosmetic Visual Inspection Specification Advantages Manufacturing and Related Processes 7
N Example of how to perform a Visual Attribute Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S FMEA Visual Inspection Detection Rating FMEA and Control Plans 32
G Thoughts on Audit Finding for not doing Gage R and R for Visual Inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8

Similar threads

Top Bottom