What are Theo Points in a checklist document for a TS16949 Audit

E

edtson

#1
I've recently received an checklist document for a TS16949 audit that includes a "Theo Points" column. Can anyone direct me or simplify how the calculation is completed? Is just a judgement call based on audit (example 1 out of 3) or is there a scale that helps to define.

Thanks,
Edtson
 
Elsmar Forum Sponsor

qusys

Trusted Information Resource
#2
I've recently received an checklist document for a TS16949 audit that includes a "Theo Points" column. Can anyone direct me or simplify how the calculation is completed? Is just a judgement call based on audit (example 1 out of 3) or is there a scale that helps to define.

Thanks,
Edtson
Very curious question. I've never heard about it. I made a research on Internet and it appears to be a scale for responses to calculate the annoyance in the case you use a scale from 1 to 4 instead of 1 to 5 derived from the name of a statistican . I do not know what is the link with ISO TS. If someone knows more, pls help. For the original poster, it could be useful to have the entire check list and have info about the source.
 
Thread starter Similar threads Forum Replies Date
Z Why Control Limits are not the same depending on type of exclusion of data points Using Minitab Software 7
Azaarus Looking for important points regarding First Piece Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
S OEM full range calibrations vs Validation special test points Medical Device and FDA Regulations and Standards News 1
M Bullet Points vs Numbered lists Document Control Systems, Procedures, Forms and Templates 11
Z Putting back excluded rows/data points in a control chart Using Minitab Software 0
Z Minitab - Updating Graph with specific data points Using Minitab Software 2
K Process Mapping - Inputs/Outputs/Detail Activities/Control points/Measurement? Process Maps, Process Mapping and Turtle Diagrams 4
D Lean and Elimination of QC Inspection Points in a New factory Lean in Manufacturing and Service Industries 9
M EU Basic UDI-DI Trigger Points - When is a new Basic UDI-DI required EU Medical Device Regulations 3
V Handling open points in design reviews 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
R Measurement - Center Points not taken into account Using Minitab Software 3
Marc Have you Lost some "Points"? (16 August 2018) Forum News and General Information 4
ScottK Dr. Deming's most neglected Points and Diseases Philosophy, Gurus, Innovation and Evolution 13
H How to define Root Cause when some points are out of control chart Statistical Analysis Tools, Techniques and SPC 6
R Understanding a few points on ISO 9001's Design and Development Planning ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
A Insights on Transactional Ticket Audits such Parameters, Weighting Points, etc ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M Poka-yoke - Key Topics and Points Problem Solving, Root Cause Fault and Failure Analysis 11
M SPC with many data points from one dimension Statistical Analysis Tools, Techniques and SPC 16
F Control Points in a combined BRCv6 and IFS v6 system Food Safety - ISO 22000, HACCP (21 CFR 120) 1
A Clean Test according to ISO 16232 - Some points Other ISO and International Standards and European Regulations 2
Q Number of Calibration Verification Points - Calipers, height gages, etc General Measurement Device and Calibration Topics 6
M Supplier Nonconformances - Key Points to ask a Metal Stamping Supplier Supplier Quality Assurance and other Supplier Issues 7
S ANOVA/Regression - Analyzing a Dataset which contains over 4500 Points Using Minitab Software 3
BradM Covegratulations to BevD - 15,000 Karma points and a silver star Covegratulations 15
Sidney Vianna Covegratulations to Ajit Basrur - 15,000 Karma points and a silver star Covegratulations 22
Q Implementation of 8 or 9 Points Above/Below Centerline question Statistical Analysis Tools, Techniques and SPC 8
J Proper Amount of Data Points for Cpk Capability, Accuracy and Stability - Processes, Machines, etc. 12
J Decision Tree using for CCP (Critical Control Points) Food Safety - ISO 22000, HACCP (21 CFR 120) 2
J Defining CCP (Critical Control Points) in a Rice Mill Plant Food Safety - ISO 22000, HACCP (21 CFR 120) 9
M Determining Critical Control Points (CCP's) in Food Safety Food Safety - ISO 22000, HACCP (21 CFR 120) 4
A Medical Device Electronic Systems Design - Points to be cleared EU Medical Device Regulations 2
S Advice for preparation of ADOA and POA audits - What are the most critical points? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
G Points to consider while defining the Quality Policy AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
H Determining the Correct Sample Size when AQL points to two Sample Sizes AQL - Acceptable Quality Level 7
B Having trouble writing a directive (procedure) that points to the right place ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 15
S Audit Points for Auditing a Welding Supplier General Auditing Discussions 14
Q How Demings Point 9 (of his 14 points) is related to the FDA QSR Quality Tools, Improvement and Analysis 3
S Concise History of Quality ? Major breakthroughs, key turning points etc. Misc. Quality Assurance and Business Systems Related Topics 2
T Conducting the "are all points within the control limits" test when there is no LCL? Statistical Analysis Tools, Techniques and SPC 2
Q How to Control Hold Points in Manufacturing? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
Ron Rompen Assistance Needed in Calculation - How to extrapolate/calculate points on a curve Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
C Conclusions from weird GR&R (Gage R&R) Results - 9 of 12 points have NDC of 1 Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
P What are the points to be discussed in a Management Review Meeting (MRM) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
M What are the strong points of Fraction Nonconforming vs. Cpk Capability, Accuracy and Stability - Processes, Machines, etc. 6
R Accounting for (Symbols for) Data Collection Points in Process Maps Quality Assurance and Compliance Software Tools and Solutions 1
K How to establish critical limit for Critical Control Points (CCPs) Food Safety - ISO 22000, HACCP (21 CFR 120) 7
C Dial Bore Gage Contact Points leaving witness/burnish marks General Measurement Device and Calibration Topics 10
B Color Individual Points on a Control Chart? Using Minitab Software 7
P Help on Treatment of Points Outside of Control Limits Statistical Analysis Tools, Techniques and SPC 4
Marc Heads Up! Win7 Can Delete All System Restore Points On Reboot After Work and Weekend Discussion Topics 1

Similar threads

Top Bottom