What does VW mean by annual requalification?

the_kakapo

Starting to get Involved
#1
Hello,

Can anyone tell me what does VW mean by annual requalification of their product that it requires its suppliers to perform.

Is D/TLD audit not enough for requalification?
Is Product audit not enough for requalification?

Thanks in advance
 
Elsmar Forum Sponsor

AMIT BALLAL

Super Moderator
#2
Couldn't find the requirement of annual re-qualification in the VW CSR. Can you share the details where this is specified?

TBMK, the requirement of re-qualification is every 3 years, not annual.
 

the_kakapo

Starting to get Involved
#3
Yes it's minimum 3 years, DTLD AND product audits are the ones that are required minumium 1 year.
My question is how do we evidence re-qualification since it's not defined.
 

optomist1

A Sea of Statistics
Super Moderator
#4
when in doubt reach out to your VW SQ or similar for clarification, when it comes to these matters, all inquiries are good...hope this helps.

Optomist1
 
Thread starter Similar threads Forum Replies Date
William55401 21 CFR 11 Password Aging - What does "periodically" revised mean in your org? Qualification and Validation (including 21 CFR Part 11) 3
M Does C=0 strictly mean 1 bad, all bad, all the time? ISO 13485:2016 - Medical Device Quality Management Systems 6
M What does "constantly" mean ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
A What does this line from MDCG 2020-3 (MDR art. 120 substantial change) mean to you? EU Medical Device Regulations 4
T What does AS9100 mean when it says you must establish a process to do X? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 24
B General Motors and Honda Alliance - What does this mean to suppliers? IATF 16949 - Automotive Quality Systems Standard 3
A What does this sentence "this symbol shall be used in the orientation shown" mean in ISO 780:2015? Other Medical Device Related Standards 4
M Definition Open Audit - What does an Open Audit mean? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
P What does UPH/m² mean? Quality Tools, Improvement and Analysis 3
L "IATF-Compliant" IATF 16949:2016 certification? What does this mean? IATF 16949 - Automotive Quality Systems Standard 13
echo7tango Circled-Z symbol on a syringe — what is it for, what does it mean? China Medical Device Regulations 24
I What does "Class" mean in an FMEA? FMEA and Control Plans 16
Q What does % study variation of 20% mean in GRR? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 17
J GHTF Incidents - What does unlabeled and labeled mean? Japan Medical Device Regulations 9
S When a deviation is opened but what does it mean to close a deviation? Misc. Quality Assurance and Business Systems Related Topics 1
armani Definition Intended Results - What does "Intended Results" mean? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 4
O What does "Gap" and "Flush" in ASME Y14.5 mean? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
qualprod ISO 9001 Cl. 4.1 and 4.2 - What does monitoring and review mean? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
J What does "factional and failure dependencies“ mean? FMEA and Control Plans 1
A What does 8.2.2.1, Determining the requirements related to products and services,mean IATF 16949 - Automotive Quality Systems Standard 1
J What does "If required by the customer" mean? IATF 16949 - Automotive Quality Systems Standard 4
J What does "Corporate stewardship" mean? IATF 16949 - Automotive Quality Systems Standard 6
J Does the word "claim" in ISO 9001 Clause 8.2.2 mean "requirement"? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
J What does "effective implementation of quality management system" mean? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
S IEC 60601-2-27: What does "linear within ±20% of the full scale output" mean? IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
I ITSM and Orchestration - What does this mean? IT (Information Technology) Service Management 2
M FDA 21 CFR 820.250 - Does "valid statistical" always mean math? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 6
S What does B, M1 through M5 and the black triangle mean in MDD ? EU Medical Device Regulations 5
E Callout of a length dimension and then P.I at the end - What does that mean? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S What does "review" of records actually mean? US Food and Drug Administration (FDA) 12
J Definition What does Engineering Judgement mean in MSA? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 1
S Definition Comply - What does 'comply' mean to you? (Definition) Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
E What does "other APPLIED PARTS" mean in IEC 60601-1 ed 3.0 8.7.4.7 b) IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
J Responsibilities, Authorities and Relationships - What does Relationship mean? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
B What does this clause mean? 4.2.3 - Legal and Other Requirements ISO 14001:2015 Specific Discussions 7
N Updating Job Titles - Does This Mean There Needs to Be a rev change? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
V What does the 95% Spheradized mean and how is it verified? APQP and PPAP 1
V What does the suffix 2 mean on 1010AK2 steel? APQP and PPAP 1
P What does 'Shelf Life' of Sterile Implantable Orthopaedic Devices mean? ISO 13485:2016 - Medical Device Quality Management Systems 5
R What does P-release mean in APQP documents regarding drawings and approvals? Design and Development of Products and Processes 1
S Definition Design Capacity - What does 'Design Capacity' (or 'Rated Capacity') mean? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 10
K What does Data Logger Accuracy = ? 0.25% of Full scale ? 1 Digit Mean? General Measurement Device and Calibration Topics 4
J Definition Equipment definition - What does "equipment" mean in the AIAG MSA Manual Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 1
D Internal Audit Frequency - What does "at Planned Intervals" mean? Internal Auditing 14
R What does the Programmable Electrical Medical System really mean? IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
A AS9100 7.4.2 d) - What does Revision Status mean? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 20
L Definition MRR Coordinator - What does "MRR" mean? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 17
I SOP - What does SOP mean in the VDA 6.3 Manual? IATF 16949 - Automotive Quality Systems Standard 6
Q Definition Design Margin - What Does Design Margin (DM) mean? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 16
D DIN 1683 Casting Tolerances - What does "GTB" mean? Other ISO and International Standards and European Regulations 7

Similar threads

Top Bottom