What is difference between the goal of PPAP with APQP, thanks

Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#2
jackylpt said:
Hi there,

what is difference between the goal of PPAP with APQP? Thanks

Michael :thanx:
Michael,

Before you can make a comparison you have to have at least two different things to compare. PPAP is part of the output of the APQP process, but you need to clarify your question.
 
A

Al Dyer

#3
jacktplt,:agree1:

Simply put;

The goal of APQP is to produce a quality plan that supports the development of a product or service that will satisfy the customer. (AIAG APQP Manual Page #1)

The goal of PPAP is to have an approved warrant in place so production parts may be sent to the customer.

Contract--->APQP--->PPAP---> = Production

Al...
 

Ron Rompen

Trusted Information Resource
#4
Just to extrapolate on Al's response, and based on my own interpretation of the PPAP process;

The PPAP is intended to demonstrate to the customer that the tooling, processese and controls that you have developed and implemented are capable of consistently meeting the customers requirements as shown on the customer print, purchase order, quality manual, and other documentation.

The PPAP is (generally) the 'best you will ever be', and should be able to be used as a benchmark against which all further production is measured.

Hope this is some help to you. If not, I'd be happy to go into further detail, either here or privately.
 

Jim Wynne

Staff member
Admin
#5
Ron Rompen said:
The PPAP is intended to demonstrate to the customer that the tooling, processese and controls that you have developed and implemented are capable of consistently meeting the customers requirements as shown on the customer print, purchase order, quality manual, and other documentation.
A good nutshell description.

Ron Rompen said:
The PPAP is (generally) the 'best you will ever be', and should be able to be used as a benchmark against which all further production is measured.
So much for continuous improvement :D. Actually, there is nothing about PPAP that says anything about the best it will ever be or any sort of benchmark.
 
Thread starter Similar threads Forum Replies Date
J Difference between a Goal and an Objective within TQM Quality Tools, Improvement and Analysis 5
W What is the difference between TYPE B and TYPE BF? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
T The difference between ISO 14644-3:2005 and ISO 14644:2019 Other Medical Device Related Standards 2
Q Terminal Lugs sizes - Difference between 225/24 vs. 275/24 lugs Manufacturing and Related Processes 2
M Difference between "Production Trial Run" and "Run at Rate" IATF 16949 - Automotive Quality Systems Standard 8
D Difference between Test Method Validation and Gage R&R Qualification and Validation (including 21 CFR Part 11) 18
A What is the difference between Design Process, Process Design and Design Control? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
R What's the major difference between Green Belt and Black Belt in term of training and project Six Sigma 3
T Difference between a subcontractor and a supplier ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 21
H Difference between Stainless Steel 316 ASTM F899 and ASTM A276 Other Medical Device Related Standards 3
A Exact terms for a plating failure and difference between rejection rate and failure rate Manufacturing and Related Processes 9
M Difference between MSA and MSE? General Measurement Device and Calibration Topics 1
gramps What is the difference between discrete and continuous variables? Problem Solving, Root Cause Fault and Failure Analysis 3
JoCam Difference between Approval and Registration - ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 2
S Difference between EU-MDR Annex IX and the Annex-combo X&XI EU Medical Device Regulations 4
T ISO 17025:2017 Clause 4.2.2 - The difference between "be notified" and "be informed" ISO 17025 related Discussions 4
Jimmy123 What is the difference between Error Proofing and Controls? ISO/IATF 16949 - Control Plans FMEA and Control Plans 16
C IEC 60601-1-8, difference between table 4 and annex D IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
A What is the difference between Basic UDI-DI and UDI-DI? EU Medical Device Regulations 6
Q What is the difference between AS9100D 9.3.2.f and 9.3.3.a AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
M Aluminum - What is the difference between 6061-T6 and 6061-T651 (both per ASTM B211)? Manufacturing and Related Processes 4
P What is the exact difference between Risk and Opportunity in context of ISO 27001? IEC 27001 - Information Security Management Systems (ISMS) 7
S Difference between Surface Finish (Ra) and Flatness (GD&T) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
O Air Flow - Which is the operational difference between LAF (vertical and horizontal) and RLAF? Manufacturing and Related Processes 2
S What the difference is between Stub Acme & Acme thread? Oil and Gas Industry Standards and Regulations 1
S DO 178B - What is the difference between review and verification? Federal Aviation Administration (FAA) Standards and Requirements 1
T The difference between SOP and Kaizen Standardization Lean in Manufacturing and Service Industries 2
K Difference between intended purpose and intended use of the device EU Medical Device Regulations 9
Q What is the difference between normal and licensed internal auditor? VDA Standards - Germany's Automotive Standards 9
J What is the difference between Process Variation and Tolerance? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
O Difference Between PFMEA & Control Plan FMEA and Control Plans 3
S Difference between an Advisory Notice (ISO 13485) and a Field Safety Notice? ISO 13485:2016 - Medical Device Quality Management Systems 3
T Difference between "data analysis" and "management review" ISO 13485:2016 - Medical Device Quality Management Systems 4
qualprod What is the difference between 7.4.1 (2008) and 8.4.1 (2015)? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
D Difference between uncertainty and expanded uncertainty of measurement General Measurement Device and Calibration Topics 1
S EASA Part 145 - The difference between non-certifying staff and Certifying staff Federal Aviation Administration (FAA) Standards and Requirements 2
S The difference between a Medical Device Accessory and Component Canada Medical Device Regulations 2
S What is the difference between a service request and a complaint? ISO 13485:2016 - Medical Device Quality Management Systems 2
I What is the difference between OOS/OOT Imported Legacy Blogs 3
A Definition Difference between Quality System Procedure and Standard Operating Procedure (SOP) Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 4
Q Difference between Monitor & Measurement ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
T QA vs. RA - The difference between QA and RA Coffee Break and Water Cooler Discussions 6
A Difference between Discrimination and Least Count IATF 16949 - Automotive Quality Systems Standard 2
K Difference between Medical Electrical Equipment and Medical Equipment System IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Usability Standard - The difference between IEC 60601-1-6 to IEC 62336 Human Factors and Ergonomics in Engineering 1
S What is the difference between Verification and Validation of Test Reports? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
A Difference between ISO 9001:2015 Clauses 8.1 and 8.5.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
M IATF 16949 Cl. 8.4.2.2 vs 8.6.5 - Is there any difference between these clauses? IATF 16949 - Automotive Quality Systems Standard 7
C What is the difference between "Overall Risk" and "Risk"? (ISO 14971) ISO 14971 - Medical Device Risk Management 10
C The difference between a Critical Dimension vs. Critical Characteristic Misc. Quality Assurance and Business Systems Related Topics 2

Similar threads

Top Bottom