What is meant by number of "items"? Chrysler Layered Process Audit Question

Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
M Para 4.6.3c - What is meant by the last part; ...number and issue of...? QS-9000 - American Automotive Manufacturers Standard 4
R What is meant by Use of COMPONENTS WITH HIGH-INTEGRITY CHARACTERISTICS in ME EQUIPMENT (clause no 4.9) IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
S What's meant by ISO9001 clause 8.7 non conforming output? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
P Validation of Processes - What is meant by 7.5.6 (a) - Defined Criteria for Review ISO 13485:2016 - Medical Device Quality Management Systems 7
J APQP Requirements - What is meant by "among other items" IATF 16949 - Automotive Quality Systems Standard 2
M "Value", A product that really meant something to you Coffee Break and Water Cooler Discussions 15
T Are Control Plans "Summary Documents" not meant to replace Work Instructions? IATF 16949 - Automotive Quality Systems Standard 3
T What is meant by a Characteristic Classification within GR&R? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
G What is meant by FAI (First Article Inspection) and how do we comply? AS9102 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 26
G AS9100 - Clarify what is meant by Statutory & Regulatory Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
A DMR (Device Master Record): What is meant by these words - Software Specifications? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 10
P Non EASA Aircraft - What is meant by Non EASA Aircraft? EASA and JAA Aviation Standards and Requirements 4
K Subgroup Size - Understanding what is meant by Subgroup Size Six Sigma 13
S Does 7.4 apply to products or services meant for Environment or OHS management? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 17
B What is meant by "Configuration Management"? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 36
H AS9102A - What is meant by 5.2.5, "... approved Special Process sources..." AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
Chennaiite What is meant by 'Lesson Learned' in the context of Problem Solving Quality Tools, Improvement and Analysis 6
C What is meant by two throws, three throws etc, when applied to Compressors? Manufacturing and Related Processes 4
W What is meant by Process Approach Auditing and What questions should be asked? Process Audits and Layered Process Audits 11
G What is meant when a datum (feature) is called a "6 way"? GD&T help Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
R What is meant by "Test Specimens" per AS9100 Clause 7.4.2 f) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
R Purchasing Information - Trouble understanding what is meant by a), b),and c) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
A TS 16949 Clause 7.4.3.2 Promotion of supplier monitoring - What is meant by promote? Supplier Quality Assurance and other Supplier Issues 6
F Scheduling Internal Audits - What is meant by 'based on status and importance'? Internal Auditing 35
D Control Number for Class III and IV devices Canada Medical Device Regulations 0
K How to handle GTINs for different configurations of one device with one part number? Other Medical Device Related Standards 0
K How can Acceptance Number and Reject Number be larger than Sample Size on Z1.4 Table? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
D Determining the the maximum number of reprocessing cycles of attachments CE Marking (Conformité Européene) / CB Scheme 2
K Why 'FD&C act section number' and 'section number' in the title of the act are different? US Food and Drug Administration (FDA) 1
A Risk Number for each software requirement IEC 62304 - Medical Device Software Life Cycle Processes 7
K Adding the Notified Body Number CE Marking (Conformité Européene) / CB Scheme 2
C Quantifying risk in choosing the number of parts, operators and replicates in a GR&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
Jane's Like-for-like critical raw material change qualification - type of testing/ number of lots required ISO 13485:2016 - Medical Device Quality Management Systems 4
Q LOT or Serial Number Symbol not used when the information is contained in the UDI? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
Proud Liberal Power Query to combine multiple tables of unequal number of columns Statistical Analysis Tools, Techniques and SPC 1
Q How is Medical Device Number (MDL) assigned to companies? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
D How to get EUDAMED Single Registration Number (SRN) EU Medical Device Regulations 17
M Informational US FDA – Modifications to the List of Recognized Standards, Recognition List Number: 052 Medical Device and FDA Regulations and Standards News 0
M Nonconformity for missing form number on the job description document Nonconformance and Corrective Action 1
I Number of decimals in equation calculated by MiniTab Using Minitab Software 0
F 2017/745 Article 31 Single Registration Number Medical Device and FDA Regulations and Standards News 5
Z Do we still have to put UDI if we have DI and lot number seperately on our product ? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
Z Two Payment Identification Number (PIN) for the same order in DFUF website 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
Ed Panek GTIN (Global Trade Item Number) for non CE Mark Other Medical Device Related Standards 4
A The latest revision number and changes in automotive core tools IATF 16949 - Automotive Quality Systems Standard 1
G Belgium - How do I get an enterprise CBE Number Other Medical Device Regulations World-Wide 0
M Document Control - Revision Number in Document Names Document Control Systems, Procedures, Forms and Templates 4
M Informational USFDA – FDA Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 051 Medical Device and FDA Regulations and Standards News 0
S How to number and control translated SOPs - Three languages Document Control Systems, Procedures, Forms and Templates 4
qualprod Calculate number of people in processes, considering cycle time/takt time = quantity of people Lean in Manufacturing and Service Industries 9

Similar threads

Top Bottom