What is minimum sample size to calculate Cp?

R

roberdm

#1
Greetings...this seems like the right place to ask this question. After I obtain control in my process by utilizing sound SPC techniques what is the minimum sample size I can use to calculate process capability, Cpk? The discussion always starts with 25 pcs and then fluctuates from 20 to 30 pcs. If you know what the minimum is please attach or list the standard it comes from. I could not find it in AS9103.

Thanks,
Dave
 
Elsmar Forum Sponsor

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#2
Re: Intermediary calculations for Cpk - What do CPU and CPL stand for?

It would be good to understand the process that you are trying to calculate the Cpk for - it does make a difference in some applications! :cool:
 
R

roberdm

#3
Re: Intermediary calculations for Cpk - What do CPU and CPL stand for?

The processes would be from multiple sources mostly strucrual aircraft parts:

1. Aluminum machined parts
2. Aluminum hydraform pats
3. Steel and titanium machined parts
 

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#4
Re: Intermediary calculations for Cpk - What do CPU and CPL stand for?

For the parts that are precision machined, if the processes were properly controlled, Cpk would not be an issue. First of all, they should exhibit a continuous uniform distribution with the only significant variation from tool wear - again, if it is precision machining. With that distribution, the capability is (USL-LSL)/(UCL-LCL). For more information, see Statistical process control for precision machining .

That calculation may not apply to the hydraformed part.:cool:
 

Miner

Forum Moderator
Staff member
Admin
#5
Re: Intermediary calculations for Cpk - What do CPU and CPL stand for?

Greetings...this seems like the right place to ask this question. After I obtain control in my process by utilizing sound SPC techniques what is the minimum sample size I can use to calculate process capability, Cpk? The discussion always starts with 25 pcs and then fluctuates from 20 to 30 pcs. If you know what the minimum is please attach or list the standard it comes from. I could not find it in AS9103.

Thanks,
Dave
The following is independent of whether Cp or Cpk are appropriate to the type of process.

First, you need to realize that both metrics are dependent on a sample mean AND a sample standard deviation.

Second, both mean and standard deviation have a confidence interval associated with them. Using both confidence intervals in the calculation results in a Cp/Cpk with an even larger confidence interval.

I have run Monte Carlo simulations on this and have found that you really need approximately 20 subgroups totaling 100 sample measurements to obtain a Cp/Cpk with reasonably tight confidence limits. This also agrees with the recommendations found in the AIAG SPC manual.
 
R

roberdm

#6
I'm looking for a standard that explains what the minimum sample size(data points or number of measurements) required prior to calculating process capability. I found a Boeing standard D1-9000 that is helpful. Sorry couldn't post the link. See 1.14 Process Capability Analysis (Cp and Cpk). See page 196.

Do you know of any other sources?




 

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#7
For precision machining, and its associated non-normal uniform distribution (which has no dependence on the mean whatsoever and the standard deviation has little to offer), you can not predict a minimum number. It depends on the tool wear rate, and how many parts is takes to generate at least one cycle of the sawtooth curve (unless you are willing to extrapolate based on the tool wear rate determined from a sample) For example, if it takes a week and 3000 parts for the tool to wear from the lower control limit to the upper control limit, then 3000 is the minimum - but if it takes 5 parts to wear at that rate, 25 parts will give you 5 cycles - or more than enough data. A little simplistic, but should illustrate the point effectively. It is critical to collect the data in time order to evaluate the tool wear rate. It is not a random sample function, as the tool wear rate is a dependent (not independent) function of time. As a dependent function, CLT does not apply, either.

Again, the previous link gives some direction to this issue.:cool:
 

Miner

Forum Moderator
Staff member
Admin
#8
I'm looking for a standard that explains what the minimum sample size(data points or number of measurements) required prior to calculating process capability. I found a Boeing standard D1-9000 that is helpful. Sorry couldn't post the link. See 1.14 Process Capability Analysis (Cp and Cpk). See page 196.

Do you know of any other sources?
No standard exists that I am aware of. The AIAG SPC manual recommends the 100 sample minimum that I mentioned above.
 
D

Darius

#9
Check this tread (a must for this topic)

Size does matter

Check my post at 4 december (the last of the tread).

Cpk can be calculated with 2 data points:mg: (enought to obtain standard deviation), but the estimate will have low confidence (or large confidence intervals), the more data, the smaller the conficence intervals.

Many take 20 or 60 (the ChiSquare normality test), but not many take the confidence intervals in account, I like the term "Cpk is not less than" (column D of the Cpk limits.xls attachement (maybe could not be the nicest picture I would like to share, but it is the way to add the size effect on Cpk).

But also take care of normality, the veracity of Cpk index depend on normality (is the variable a gausian ones), if not, Cpk could be used as an indicator but the meanning could be farther from the original.
 
Last edited by a moderator:

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#10
Picking one "good number" of parts to develop the distribution if the process is a properly controlled precision machining process requires an understanding of the number of parts to develop one cycle of the sawtooth curve. To get the correct number of samples, you must have a quantity the determines either one complete cycle, or multiples of complete cycles. Otherwise, you will get incorrect distributions which may lead you to capability calculations.

Statistical process control for precision machining - Part 3 - Sampling Error

Fact is, if you are controlling your machining processes correctly, the capability is simply (USL-LSL)/(UCL-LCL). You will note that sampling is not required to determine this value!
 
Thread starter Similar threads Forum Replies Date
M Minimum sample size - Guidance and statistical rationale Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
D What is the minimum Sample Size for Weibull Analysis Reliability Analysis - Predictions, Testing and Standards 12
J Minitab Sample Size Calculation: 1 Sample t vs Minimum Sample Size for Means Using Minitab Software 3
D Minimum Size of Control Sample in Medical Research Lab Work Statistical Analysis Tools, Techniques and SPC 2
N ETO Sterilisation Validation - EO Residual Minimum Sample Requirement ISO 13485:2016 - Medical Device Quality Management Systems 2
B What is the minimum sample required for Performance Evaluation for IVD ? EU Medical Device Regulations 3
D LiPo battery minimum requirements IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
P Search function minimum length Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 3
Q Capability study with a minimum spec Statistical Analysis Tools, Techniques and SPC 8
L Significant Production Run - How 300 was determined to be the minimum quantity APQP and PPAP 2
Marco Bernardi MMC & LMC modifiers and CMM measuring techniques like diameter least squares and circularity or minimum/ maximum diameter Calibration and Metrology Software and Hardware 5
shimonv Minimum 60601 requirements for a clinical trial IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
J Minimum Supplier Certifications for Food Supplements Food Safety - ISO 22000, HACCP (21 CFR 120) 4
J What is the minimum standard for automotive component traceability? Manufacturing and Related Processes 2
M Applicability of IEC 60950-1 Table K2 - Minimum clearances between circuits Various Other Specifications, Standards, and related Requirements 0
M Characterization Testing - NO acceptance criteria, no minimum performance requirement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
K Is minimum repair or replace guarantee period for medical devices in EU the same as consumer guarantee law of 2 years? EU Medical Device Regulations 5
S Designing the experiment with minimum run Statistical Analysis Tools, Techniques and SPC 0
S Designing the experiment with minimum run Statistical Analysis Tools, Techniques and SPC 0
JoshuaFroud Change Control - Minimum Requirements and Unhappy Staff ISO 13485:2016 - Medical Device Quality Management Systems 16
J IATF Minimum Automotive Quality Management System Requirements for Sub-Tier Suppliers IATF 16949 - Automotive Quality Systems Standard 12
F Regulatory Compliant Quality Management System - Bare Minimum EU Medical Device Regulations 2
S What is the minimum pressure differential required for ISO Class 8 Clean Room? ISO 13485:2016 - Medical Device Quality Management Systems 3
somashekar ISO 13485 plus ISO 9001:2015 will now attract a minimum 2 day upgrade audit ISO 13485:2016 - Medical Device Quality Management Systems 9
J Minimum staff per 21 CFR Part 820 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
S Is there a minimum industry standard for PpK ? Statistical Analysis Tools, Techniques and SPC 8
K What are the minimum requirements for Process Validation (Software)? ISO 13485:2016 - Medical Device Quality Management Systems 5
C Battery Powered Beauty Products minimum Legal Certifications Requirements CE Marking (Conformité Européene) / CB Scheme 7
D Minimum requirements/experience/qualifications to be head of quality Career and Occupation Discussions 6
R Minimum Essential Receiving Inspection (M.E.R.I.) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
S What is the minimum samples required for Customer Survey? Quality Manager and Management Related Issues 3
J Minimum number of parts to do an attribute gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
I Minimum and Maximum Validation Batch Size Requirements Qualification and Validation (including 21 CFR Part 11) 3
A Minimum Number of Parts for Attribute (Go / NoGo) Data Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S Minimum documents required by AS9100 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
N Minimum Design factor for CE Marking for machinery CE Marking (Conformité Européene) / CB Scheme 2
G Why for a Shewhart chart the minimum feasible value for APL is 2401 units? Statistical Analysis Tools, Techniques and SPC 8
A Minimum Testing Requirements for a Clear Protective Equipment Barrier (Class II 510K) Other US Medical Device Regulations 1
V Critical Characteristics - Capability for a Minimum Specification APQP and PPAP 11
BradM What is the minimum size chamber for mapping? ISO 13485:2016 - Medical Device Quality Management Systems 2
Q Minimum Organization Structure to support TS16949 IATF 16949 - Automotive Quality Systems Standard 5
Q Minimum content required in a Quality Manual as per ISO 9001:2008 Quality Management System (QMS) Manuals 6
A ISO 13485 Supplier Monitoring Minimum Requirements Supplier Quality Assurance and other Supplier Issues 3
T New Packaging Line Performance Qualification (PQ) - Minimum Test Times ? Qualification and Validation (including 21 CFR Part 11) 3
F How to calculate the minimum Value of Mass needed for Scales Calibration? General Measurement Device and Calibration Topics 6
W ITAR (International Traffic in Arms Regulations) Minimum Requirements or Shalls Other ISO and International Standards and European Regulations 9
JoCam Equipment Guarding - Safe Distance - Is there a specified minimum distance? Occupational Health & Safety Management Standards 6
F How to Calculate Cpk with only a Minimum Tolerance Capability, Accuracy and Stability - Processes, Machines, etc. 11
H SOP containing Minimum Requirements for Master Production Record US Food and Drug Administration (FDA) 1
S What is the 10d in the owner's manual for a balance's minimum weight? General Measurement Device and Calibration Topics 5

Similar threads

Top Bottom