What is our requirement for maintaining the EMC series of standards? IEC 61000

Bunny

Quite Involved in Discussions
#1
We are a medical device designer/manufacturer. We do not perform any EMC testing in house. What is our requirement for maintaining the EMC series of standards? IEC 61000-4-2, 4-3, 4-4, 4-5. I would have to spend >$1000 to obtain the latest versions if we do not need to.
 
Elsmar Forum Sponsor

Pads38

Trusted Information Resource
#2
We are also manufacturers; I "look after" the EMC side of things. We use an external test house, but have on occasion hired test gear to do some in-house pre-compliance and development work.

The only standard we maintain is 60601-1-2.
Sometimes it would be useful to have access to details within the source standards (the 61000 series and CISPR etc). But usually the information can be found on-line in guidance documents or technical articles.

We also benefit from a good professionally friendly relationship with our usual EMC test house. They can also provide background information when needed, and they of course keep all the standards.
 

Bunny

Quite Involved in Discussions
#3
I should add that we maintain compliance certificates to ISO 9001 & 13485.

Alright, I will not plan to purchase the revised 61000 series.

Thanks.
 
#4
We are a medical device designer/manufacturer. We do not perform any EMC testing in house. What is our requirement for maintaining the EMC series of standards? IEC 61000-4-2, 4-3, 4-4, 4-5. I would have to spend >$1000 to obtain the latest versions if we do not need to.
There is no requirement for this.
Standards are mandatory.
 
Thread starter Similar threads Forum Replies Date
W Misinterpretation of requirement acceptable as root cause? Problem Solving, Root Cause Fault and Failure Analysis 19
S ECG Cable Banana to Snap or Tab electrode Adapters -- ISO 10993 Requirement Other Medical Device Related Standards 0
D IATF 16949 Requirement for CMMI in a Global Company Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 0
W Regarding Requirement for Hi pot & Leakage Current test Station Set-up IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
L Stage 2 audit - Requirement for 3 months of records ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
M Requirement to manufacture under a quality management system EU Medical Device Regulations 4
A Risk Number for each software requirement IEC 62304 - Medical Device Software Life Cycle Processes 7
T ISO 17025:2017 requirement 5.7.b. about maintenance the integrity of the management system ISO 17025 related Discussions 1
I Laboratory Fridge / Freezer Inventory - Requirement(s) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
A Several sections of traditional 510(K) have the same or similar requirement of content. US Food and Drug Administration (FDA) 4
S Requirement to Conduct New Shelf-life Testing? (re-do testing for design change) EU Medical Device Regulations 3
C Compliance with ISO 17025 requirement 8.4.2 - Controls - Records recovery ISO 17025 related Discussions 4
Q User Requirement Specification for HR (Human Resource Management System) Manufacturing and Related Processes 1
P Obstruction alarm requirement ISO 80601-2-12 Other Medical Device Related Standards 1
P Electrosurgical Device User Need: Cord Flexibility -> Requirement Other Medical Device and Orthopedic Related Topics 4
C Industrial scales and MSA (IATF 16949 requirement 7.1.5.1.1) IATF 16949 - Automotive Quality Systems Standard 30
C ISO 13485 Requirement in Australia/NZ for class 1? ISO 13485:2016 - Medical Device Quality Management Systems 1
N Label Placement Requirement in MDD/MDR EU Medical Device Regulations 1
adir88 MDR requirement: Risk Management Plan for "each device" ISO 14971 - Medical Device Risk Management 5
S Article 61 - MDR Clinical Investigation Requirement EU Medical Device Regulations 5
V 3 PQ lots mentioned as requirement in PPAP. Is this necessary? APQP and PPAP 2
I MSA requirement for 5 Micrometers + CP changes need customer approval? IATF 16949 - Automotive Quality Systems Standard 2
F AS9100D, raw material standards are a requirement for manufacturing? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
S Clinical Evaluation - Is this an ISO 13485:2016 requirement? ISO 13485:2016 - Medical Device Quality Management Systems 4
S ISO17020 - Equipment calibration requirement General Measurement Device and Calibration Topics 3
A ISO 17025 Requirement 6.2 - Department Manager Testing Qualifications ISO 17025 related Discussions 1
F Process Review - What is the ISO requirement for reviewing SOPs and quality documentation? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
shimonv IEC 60601-1 Essential Performance - Is the signal accuracy specification an essential requirement? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
Ronen E Can anyone please explain this? (510k submission requirement) Other US Medical Device Regulations 14
M EU MDR - Annex II 3b - What documents fall under this requirement? EU Medical Device Regulations 3
D Vietnam requirement of CE mark for medical devices CE Marking (Conformité Européene) / CB Scheme 4
C Does ISO 9001-2015 have a requirement for manufacturing equipment to be numbered? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
L Gage R&R studies for identical Devices - Need to confirm the requirement to perform them Reliability Analysis - Predictions, Testing and Standards 2
A Microbial exposure during use - Requirement 11.1(c) EU Medical Device Regulations 1
D Requirement of Pharmacovigilance (Drug Safety) Risk Based Strategic and Tactical Audit Plan General Auditing Discussions 0
S Device name change and label color change EU requirement? Other Medical Device Regulations World-Wide 6
I Receiving Inspection Requirement in IATF IATF 16949 - Automotive Quality Systems Standard 3
C ISO 17025 2017, Requirement 6.6.3 - Communicate requirements to external providers ISO 17025 related Discussions 4
D AS9100 Inspection records - Is there a requirement to have gauge ID and calibration status AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
A EU-MDR Annex I Requirement 10.1(d) EU Medical Device Regulations 3
padraick63 REACH and ROHS Requirement for a Molded Part REACH and RoHS Conversations 1
M Requirement for manufacturing process validation in IATF 16949 IATF 16949 - Automotive Quality Systems Standard 8
J IMDS for Trucks in USA as a requirement RoHS, REACH, ELV, IMDS and Restricted Substances 1
D FDA Date Format Requirement US Food and Drug Administration (FDA) 0
XRAY_3121 Design and Development Requirement - MDSAP Audit Finding Other Medical Device Regulations World-Wide 5
M IATF 16949 - 8.5.6.1.1 Providing a list of process controls: Does this requirement add value to QMS? IATF 16949 - Automotive Quality Systems Standard 4
V "Manufacturer Symbol on Device is missed due to space constraint" EU requirement EU Medical Device Regulations 11
M Characterization Testing - NO acceptance criteria, no minimum performance requirement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
Prashant G AS9100 Requirement - Verification of characteristics results with drawing requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
P Software requirement and design specifications - Medical device contains both hardware and software IEC 62304 - Medical Device Software Life Cycle Processes 2

Similar threads

Top Bottom