What is reference standard and reference materials as per clause 5.4.5.2 note 2?

C

CKW75

#1
Dear all,

I would like to know what is being explained in Note 2 clause 5.4.5.2 regarding about reference standard and reference materials.

Is it reference standard is a documents like ISO standard or is an object? What actually is a refrence materials? Is it only in calibration that we will use a reference standard and material and not in testing?

Thanks
 
Elsmar Forum Sponsor

Hershal

Metrologist-Auditor
Staff member
Super Moderator
#2
Both are objects.

For example, if you internally calibrate or even check a set of calipers using gage blocks, then under ISO/IEC 17025, the gage blocks are a reference standard.

A reference material can be certified solutions, such as water or cement.

These are limited examples, but should give you a good starting point.

Hope this helps.

Hershal
 
Thread starter Similar threads Forum Replies Date
G Measure 3 times, for calibration report? Customer Owned Reference Standard General Measurement Device and Calibration Topics 4
S Lot assignment for secondary reference standard - Pharmaceuticals Manufacturing and Related Processes 0
C Must your reference standard provider be ISO17034 certified to meet your testing lab's ISO 17025 certification requirements? Other ISO and International Standards and European Regulations 2
Q Control of Standard Operating Manuals used as Reference AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
F Calibration Reference Standard for Mass Weight Calibration General Measurement Device and Calibration Topics 2
J Looking for reference to Electronics Industry's Standard Scrap Rates ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
J Frequency of Re-Testing Working Standards (Secondary Reference Standard) Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
howste Determining Calibration Uncertainty with Unknown Reference Standard Uncertainty Measurement Uncertainty (MU) 8
F Moisture Analyzer Calibration Reference Standard General Measurement Device and Calibration Topics 7
E Reference Standard for Shelf Life Testing of Packaging for Sterilized Medical Device Other US Medical Device Regulations 3
E Using Customer Unit as Reference Standard General Measurement Device and Calibration Topics 14
L Calibration of Dial Thickness Gauge - What reference standard need I follow? General Measurement Device and Calibration Topics 5
M Reference Standard for Clean Air in Food Production Areas Food Safety - ISO 22000, HACCP (21 CFR 120) 5
R Use of Reference standard in Calibration of measuring Tools General Measurement Device and Calibration Topics 1
R Reference Standard for the Calibration of Dimensional Measuring Tools General Measurement Device and Calibration Topics 2
P MIL colour standard G383 - Looking for a corresponding pantone or RAL reference Various Other Specifications, Standards, and related Requirements 4
Raffy Definition Reference Standard vs. Working Standard - Differences Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 12
N Reference Standard for Acceptance Criteria for Validation of a Reagent Various Other Specifications, Standards, and related Requirements 2
A Definitions in ISO 17025 - Standard reference, Certified reference material, etc. ISO 17025 related Discussions 1
A AS9006 Standard Reference AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
Manix Automotive Headunit Sizes - Standard Numbers - DIN size with No Document Reference Other ISO and International Standards and European Regulations 2
J Does anyone have information on standard reference DIN 936? Other ISO and International Standards and European Regulations 4
S Does QS-9000 reference a specific drawing standard? QS-9000 - American Automotive Manufacturers Standard 1
M SOPs - Reference Documents Section Document Control Systems, Procedures, Forms and Templates 3
B Reference to IEC 60950-1 in Amendment 2 IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
D Question on equipment - when to use reference only or research only stickers ISO 13485:2016 - Medical Device Quality Management Systems 5
J Marking "Distributed By" to product with distributors' reference-code EU Medical Device Regulations 3
Dazza 9001, 14001 and 45001 mandatory documents and records cross reference matrix Process Maps, Process Mapping and Turtle Diagrams 2
T CSE 5.01 reference on drawing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
N IEC 60601-1-1 - Stress test, reference voltage IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
CycleMike GD&T - Hole pattern - Print (attached) has a single Datum Reference Frame Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J Sample size for creating a data base as a reference to a tested variable Other Medical Device and Orthopedic Related Topics 6
R ASQ reference material clarification - Spiral bound materials allowed in ASQ Exam? Professional Certifications and Degrees 1
D Good Acceptance Activity/Inspection flowchart for reference - Wanted Please Process Maps, Process Mapping and Turtle Diagrams 2
G Customer complaint over a Reference Dimension Manufacturing and Related Processes 9
I Data Backup Plan - Document Reference ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Q How to efficiently and compliantly reference external standards/regulations Other Medical Device Related Standards 2
V Inspection with 3D Scanning - Reference Data Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
E Ethylene Oxide Sterilization Validation-Reference Load Other Medical Device Related Standards 2
C Do Calibration Reference Standards require an MSA study? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
J Purpose of Reference Section in SOPs Document Control Systems, Procedures, Forms and Templates 6
M Quality Policy - Standards and reference numbers ISO 13485:2016 - Medical Device Quality Management Systems 14
M Reference to IATF 16949 clause 8.4.3 in clause 8.3.4.4, Is it right? IATF 16949 - Automotive Quality Systems Standard 1
S Reference calibration tools (traceable to NIST) that are not used in production ISO 13485:2016 - Medical Device Quality Management Systems 4
S Contract Manufacturer Question - Whether or not the reference to the ex-CMO ISO 13485:2016 - Medical Device Quality Management Systems 6
B Need to convert Reference Only M&TE to a calibration schedule General Measurement Device and Calibration Topics 3
M Looking for Cross reference of AS9100:2016 to ISO13485 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
E Print only has Reference Dimensions Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
V QMS / QSR - Reference to Framework - Templates - Procedures for Medical Devices 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
R How to Cross-Reference Controlled Documents Document Control Systems, Procedures, Forms and Templates 3

Similar threads

Top Bottom