SBS - The Best Value in QMS software

What is the connection between Ford's phased PPAP and edition 4 from AIAG

S

Salvador Romero

#1
Phased PPAP

Hello, I need to implement the new version of Phased PPAP 4th edition, could anybody help me to get this new version?
 
Elsmar Forum Sponsor
O

Old Quality Gal

#3
Ford Phased PPAP Process

Hi Folks, I always ask you help and you always seem to have what I need.
I need info and access to information on the Ford Phased PPAP Process.
Anything you can give me will help. We are a compliance software provider and I need to see if we need to change anything in our software based on this process.
I went to the Port Huron conference on the edition 4 changes and they seem minor but I have clients asking about the Ford Process and I have no access to the Ford Portal to see the white paper or any info.
If anyone has anything they can share that would be great.
Interestingly enough it is mainly my European Volvo customers pressing me to explore this for them.
Thanks in advance!
I personnaly think the customer specific requirements are out of control, onerous for suppliers to address and at odds with the intent of common systems and practices in TS 16949. The crowd at Port Huron practically had torches and nooses growling at the big 3 representatives when they spoke. I don't blame them.
 

Howard Atkins

Forum Administrator
Staff member
Admin
#4
Sorry I have no specific Ford info.
If you find any please share
Good luck in the search.
This PPAP 4th edition is dragging it's feet for nearly 2 years:confused: :confused:
 

antoine.dias

Quite Involved in Discussions
#5
Any help in Phased PPAP

Old Quality Gal said:
Hi Folks, I always ask you help and you always seem to have what I need.
I need info and access to information on the Ford Phased PPAP Process.
Anything you can give me will help. .
In attachment I have some information that may be of use for you.

Best regards,

Antoine
 

Attachments

Thread starter Similar threads Forum Replies Date
S Is there any connection between PFMEA and Acceptance Plan FMEA and Control Plans 1
L Connection between IEC 62304 and Chapter 14 of IEC 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
J Connection between Technical File and Declaration of Conformity CE Marking (Conformité Européene) / CB Scheme 2
F Functional connection between ME and non-medical equipment in different rooms IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
optomist1 Contour vs. Profile - Is there a connection between "Contour" & "Profile"? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
M Connection between DFMEA and PFMEA - What must be transferred to the PFMEA? FMEA and Control Plans 9
S Medical watch Class II (AP Type CF) with USB connection IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
D Defibrillation protection for patient connection except for electrodes IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
B USB-Connection - Creepages and Clearances IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
U PATIENT CONNECTION for HAND-HELD Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
B Detachable Power Supply Cable Connection ESD Clarification IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
R Connection to a generic separate power supply IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
Q ME System - Is a Wireless Connection a "Functional Connection"? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
R Appliance Connection for IEC 60601-1-11 Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
R Is protective earth connection regarded as a part of the applied part? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
Wes Bucey Slow Internet Connection After Work and Weekend Discussion Topics 3
P Test Voltages for a Pulse Transformer used to Isolate the Patient Connection IEC 60601 - Medical Electrical Equipment Safety Standards Series 11
I Connection of Secondary Circuits to Medical Weight Scale Enclosure IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
W Patient Circuits / Patient Connection / Applied Parts - Medical Device Definitions IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
Jim Wynne Tech Guy Radio: Woman Wants Help in Getting Her Stolen Internet Connection Back After Work and Weekend Discussion Topics 2
Colin Cost of Internet connection in hotels Travel - Hotels, Motels, Planes and Trains 55
L Is there any connection betweeen ISO 14001 and RoHS? RoHS, REACH, ELV, IMDS and Restricted Substances 6
T PPAP Appendix F.3 "Customer Plant Connection" - Bulk Materials - Steel Coil Supplier APQP and PPAP 4
A What is different between Field Safety Notice and Advisory Notice in U.S and EU? Document Control Systems, Procedures, Forms and Templates 0
R Whats different between these position CE Marking (Conformité Européene) / CB Scheme 10
G What's the difference between 1.32 and 1.33 Cpk? Capability, Accuracy and Stability - Processes, Machines, etc. 18
U How to pick between ANSI Z1.4 vs. ISO2859-1 for AQL Inspection? What are the major differences? AQL - Acceptable Quality Level 4
H Independence between the development and testing IEC 62304 - Medical Device Software Life Cycle Processes 6
Moumen H Variations between ASTM A29 Standard for steel bars and Mill test certificates specs Manufacturing and Related Processes 1
N R&R for Differences between 2 measurements Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S Distinction between a critical supplier and a Virtual manufacturer EU Medical Device Regulations 2
I Сorrespondence between hazards and risks ISO 14971 - Medical Device Risk Management 2
W What is the difference between TYPE B and TYPE BF? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
T The difference between ISO 14644-3:2005 and ISO 14644:2019 Other Medical Device Related Standards 2
Q Terminal Lugs sizes - Difference between 225/24 vs. 275/24 lugs Manufacturing and Related Processes 2
T Relationship between ISO 9001 and ISO – IEC BS EN 870079- 34 2020 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
M Difference between "Production Trial Run" and "Run at Rate" IATF 16949 - Automotive Quality Systems Standard 8
Ron Rompen Surface Finish Correlation between Ra, Rz and Tp (bearing surface ratio) General Measurement Device and Calibration Topics 3
L MRA between EU and Switzerland - 1/2021 EU Medical Device Regulations 2
D Difference between Test Method Validation and Gage R&R Qualification and Validation (including 21 CFR Part 11) 18
K Joint approval between OEM and Manufacturer on Design Documents ISO 13485:2016 - Medical Device Quality Management Systems 4
C Is my software an accessory? Telecommunication between HCP and patients EU Medical Device Regulations 10
K Verify Software Architecture - supporting interfaces between items IEC 62304 - Medical Device Software Life Cycle Processes 2
E ASTM F2118 - Fatigue testing of bone cement - Changes between the 2003 and the 2014? Other Medical Device Related Standards 1
A What is the difference between Design Process, Process Design and Design Control? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
R What's the major difference between Green Belt and Black Belt in term of training and project Six Sigma 3
DuncanGibbons How is the arrangement between Design and Production organisation envisaged? EASA and JAA Aviation Standards and Requirements 4
M Risk Analysis Flow - Confusion between ISO 14971 and IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 8
T Difference between a subcontractor and a supplier ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 21
K %GRR was between 10-30% so we have to have a "backup plan" per auditor IATF 16949 - Automotive Quality Systems Standard 15

Similar threads

Top Bottom