What is the most common industry requesting ISO 9001 Certification

J

JonaAshe

#1
Hi All,

New to the forum. Can anyone tell me which industry/business leads in requests for ISO 9001 certification?

Many thanks.
 
Elsmar Forum Sponsor

Jen Kirley

Quality and Auditing Expert
Staff member
Admin
#2
Re: What is the most common industry requesting ISO 9001 Certication

Welcome to the Cove! :bigwave:

ISO 9001 was started as a manufacturing based specification, and it remains primarily so although other industries (e.g. distribution, design, services in sectors both inside and outside of manufactured goods). That said, its principles can and have been applied to unlikely industries such as education.

Are you a student? If so, what is your major?
 
Thread starter Similar threads Forum Replies Date
P Hardware Naming and Description issue - Is TAP BOLT an industry common term? Manufacturing and Related Processes 14
Geoff Cotton Wire manufacturing industry - Common terminology Manufacturing and Related Processes 2
M MDR "Common Specifications" (CS) - If not standards, then what? EU Medical Device Regulations 3
G Is it common to do a repeatability check during calibration of an instrument? General Measurement Device and Calibration Topics 5
M Medical Device Directive - Seeking common nonconformance write up scenarios CE Marking (Conformité Européene) / CB Scheme 2
K PFMEA (Process FMEA) - Can be common for 3000 products? FMEA and Control Plans 2
Sidney Vianna What do these things have in common? Surge in new ISO Committees & Standards Other ISO and International Standards and European Regulations 7
A CTD (Common Technical Document) for a Topical Preparation Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
W IMDS - Help (Common Warning and Error Fixes) RoHS, REACH, ELV, IMDS and Restricted Substances 9
M CB and Internal auditors most common nonconformities against AS9100D AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 16
W Can 2 different sites under different Quality System have a common management review? ISO 13485:2016 - Medical Device Quality Management Systems 4
G ISO 17025 Calibration Laboratory Assessor's Common Questions and Procedures ISO 17025 related Discussions 11
M IATF:16949 Common Quality Manual - Company is in Country A and Country B Quality Management System (QMS) Manuals 5
I Is it common practice for a bake oven to require a CQI-9? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
P Converting DMF III into eCTD (Electronic Common Technical Document) Medical Information Technology, Medical Software and Health Informatics 4
R Common Statistical Errors Using Minitab Software 1
cscalise Separate Forms or Procedure Attachments - What's more common? Document Control Systems, Procedures, Forms and Templates 2
2 Is it common to employ part time dental assistants ? Coffee Break and Water Cooler Discussions 3
P What do you think is the most common root cause of NCRs in a construction project? Quality Manager and Management Related Issues 3
BHobbs_Busche ISO/TS16949:2009 - MSA requirements for common gages IATF 16949 - Automotive Quality Systems Standard 5
S Common Electric Fan Motor Problems Reliability Analysis - Predictions, Testing and Standards 3
AnaMariaVR2 Finding a Common Language for Disaster-resistant Supply Chains Supply Chain Security Management Systems 1
M Common Reasons for Out Of Tolerance condition of DC Calibrator or any reference std General Measurement Device and Calibration Topics 1
V Most Common Internal/External Audit Observations on Risk Management ISO 14971 - Medical Device Risk Management 4
V Common Root Cause for Failures in Scaleup & Commercial (Validation) Batches 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
S ISO 13485 - Moving towards common (single) certification for multiple locations ISO 13485:2016 - Medical Device Quality Management Systems 13
J Is this practice common? 1 Quality Manager covering QA, QC, QE, SQE IATF 16949 - Automotive Quality Systems Standard 20
S How to do Adjustments & Repairs on Common Inspection Equipment General Measurement Device and Calibration Topics 7
J TL9000 Common Measurements - Design and Development for Telecommunication Products TL 9000 Telecommunications Standard and QuEST 5
M VDA Specifications - Common definitions, acronyms, etc. VDA Standards - Germany's Automotive Standards 1
V Common Failure Modes for a Product/Process Line ISO 14971 - Medical Device Risk Management 1
V Common Errors while Implementing Risk Management Process ISO 14971 - Medical Device Risk Management 9
V Common Coating Problems in Refinery Manufacturing and Related Processes 1
P The most common name for specifications? Design and Development of Products and Processes 3
M Do all common polymers have estrogenic activity? Other Medical Device and Orthopedic Related Topics 5
S What are the common Problems preventing (Gaps) Implementation of ISO 14001? ISO 14001:2015 Specific Discussions 7
B Common Sterilization Methods in Hospital - Prevalence? Hospitals, Clinics & other Health Care Providers 2
B ISO Clause Reference for Developing Common Customer Service Standards ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
N CMC File Content and what is common to share with the customer ISO 13485:2016 - Medical Device Quality Management Systems 4
somashekar Definition Evaluate and Select ... What are the most common understandings of these words. Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 12
Wes Bucey Privacy of communications - a common myth Career and Occupation Discussions 3
A Common causes of Corrosion on Alm 7075 Material Annodized, Tumbled, and Plated Manufacturing and Related Processes 6
P Are all standards based from common sense? Coffee Break and Water Cooler Discussions 11
B MSA (Measurement Systems Analysis) with One Operator using a CMM or Common Calipers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M General decline in good manners / common courtesy? Coffee Break and Water Cooler Discussions 26
E Which standard Cpk value intervals are common or frequently used? Statistical Analysis Tools, Techniques and SPC 5
ScottK Retroactive FMEA and Control plan - is this a common thing? FMEA and Control Plans 12
P Small parts trouble Kanban - Problems with the common small/bulk parts Lean in Manufacturing and Service Industries 8
M Gulf Cooperation Council (GCC) Common Market for Medical Devices? ISO 13485:2016 - Medical Device Quality Management Systems 6
M Common tools defined Funny Stuff - Jokes and Humour 3
Similar threads


















































Top Bottom