What tests are required for NES 4063 Microporous Chrome?

V

vardar3

#1

Can anyone tell me what test are required for NES 4063 grade1 Cr1s Microporous Chrome? I have the specification, and from what I can tell it requires:
· Plating thickness
· Plating Film microporosity
· Platting corrosion resistance (CASS test)
· Plating heat Cycle resistance
· Anti-Glare

I find the spec hard to understand, but if your are experienced with this specification I would appreciate the help.
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#2
A quick "Bump". My Thanks in advance to anyone who can help with this one.
 

Jim Wynne

Staff member
Admin
#3
Can anyone tell me what test are required for NES 4063 grade1 Cr1s Microporous Chrome? I have the specification, and from what I can tell it requires:
· Plating thickness
· Plating Film microporosity
· Platting corrosion resistance (CASS test)
· Plating heat Cycle resistance
· Anti-Glare

I find the spec hard to understand, but if your are experienced with this specification I would appreciate the help.
This is a Nissan spec, and a copy of it may be viewed here. There is no copyright notice on the document and I have no way of knowing if the linked copy is current.

I have no experience with Nissan standards or what's expected, and I agree that the spec is a bit difficult to parse. My advice is to confirm the requirements with your customer.
 
Thread starter Similar threads Forum Replies Date
S Required tests for Surgical gown US Food and Drug Administration (FDA) 1
Z EN 868-8 "required tests" - Rigid sterilization containers Other Medical Device Related Standards 0
N ECoG/EEG electrodes - Required IEC 60601-1 tests IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
V Are microbial limit tests required for sterile products? Qualification and Validation (including 21 CFR Part 11) 3
M ISO 13485 - What Safety Tests are Required? ISO 13485:2016 - Medical Device Quality Management Systems 6
M ISO 13485 - Are Earth Leakage Tests Required? ISO 13485:2016 - Medical Device Quality Management Systems 2
C Safety Tests Required for In-Process Testing of Medical Devices IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
A Class IIa Annex II CE Marking - Required Tests and Documentation CE Marking (Conformité Européene) / CB Scheme 3
A Tests required for CE Marking a Class 2A Medical Device EU Medical Device Regulations 6
B Required Knee Prosthesis Class III Tests and Design Dossier EU Medical Device Regulations 2
Z What Specific Tests are Required to Label a Device as being DEHP Free EU Medical Device Regulations 5
M IEC 60601 - List of required tests - Medical Device Class IB IEC 60601 - Medical Electrical Equipment Safety Standards Series 10
B HACCP plan for Frozen Shrimp - Required toxicity tests Food Safety - ISO 22000, HACCP (21 CFR 120) 6
M Required Genotoxicity Tests for Implantable Medical medive Other Medical Device and Orthopedic Related Topics 1
W Non Sterile Medical Device Environmental Tests Other Medical Device Related Standards 4
M Sterile packing validation tests to be performed and protocol Other Medical Device and Orthopedic Related Topics 1
E Routine production tests - dielectric voltage withstand test IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
B IEC 61010-1 - Voltage / Dielectric strength tests IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
Q Old products new class - Dental Devices - Choosing tests EU Medical Device Regulations 2
G Supplier flowdown verification of tests and revisions Supplier Quality Assurance and other Supplier Issues 0
O Is it mandatory for Medical Devices to work properly after dielectric strength tests? IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
K Changes in process dispersion, and location hypotheses tests Using Minitab Software 3
M MDR requires the NB to perform "tests in order to check that the quality management system" EU Medical Device Regulations 3
M Define voltage and frequency to perform tests 61010-1 and 61326-1 for CE certification CE Marking (Conformité Européene) / CB Scheme 4
M Informational US FDA Final Guidance – Coronary, Peripheral, and Neurovascular Guidewires – Performance Tests and Recommended Labeling Medical Device and FDA Regulations and Standards News 0
C ABS plastic : which IEC 60601-1 tests to redo? IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
J GLP accreditation for mechanical tests of medical device? Other Medical Device and Orthopedic Related Topics 1
M Routine testing of medical electrical systems - What specific electrical safety tests should be performed? IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
A Touch current in single fault conditions test and earth leakage current in normal conditions test, are they really different tests? IEC 60601 - Medical Electrical Equipment Safety Standards Series 8
O Statistical justification of sampling size in V&V tests ISO 13485:2016 - Medical Device Quality Management Systems 5
T Tests IEC 60601-1 - Grounding Resistance, Leakage Current and Dielectric Rigidity in an automated way IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
John Predmore A Balanced view of statistical tests Statistical Analysis Tools, Techniques and SPC 3
D API 6A Chokes - PR1 / PR2 Tests Oil and Gas Industry Standards and Regulations 12
E 2 participants in inter-laboratory comparison tests ISO 17025 related Discussions 3
O Is Patient Cable Exempted from EFT Tests? (IEC 60601-1-2) CE Marking (Conformité Européene) / CB Scheme 1
R Room requirements for electrical tests in devices ISO 13485:2016 - Medical Device Quality Management Systems 2
M EN60601-1-2 4th edition requirements - Tests for devices produced in two options IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
S Clarification regarding tests in IEC 60601-2-25 IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
F Sample Size for Biocompatibility Tests Other Medical Device Related Standards 4
T List of Tests - IEC 61010-1, 3rd edition and IEC 60601-1, 3.1 edition IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
Gamula Biocompatibility GLP conform tests outside China China Medical Device Regulations 1
W Equipment for Oven Calibration, Uniformity and System Accuracy Tests AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
T ISO 17025 Section 5.9.1 - Assuring Quality of Tests - Requirements ISO 17025 related Discussions 4
K VDA 2 Requirements of Tests for PPA VDA Standards - Germany's Automotive Standards 2
W CPU BIST IEC 62304 - Embedded code has CPU instruction tests IEC 62304 - Medical Device Software Life Cycle Processes 2
K How do you select the right grips for your tensile tests? Imported Legacy Blogs 0
Q Standardized Anodize Coating Tests Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
D Should Biocompatibility Tests be performed on Production Samples? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 9
R Medical Device Storage Temperature Tests and Requirements EU Medical Device Regulations 14
R Is pre-conditioning supplier component before incoming inspection tests allowed? Quality Manager and Management Related Issues 16

Similar threads

Top Bottom