When to issue a Class II Device Recall (failure not harmful nor a safety issue)

A

aoldendo

#1
Hi all:

This is my first post on Elsmar Cove, but I have been lurking for many months and have greatly benefited from the discussions here. I look forward to your opinions on the following matter..

My company produces a Class II device. We have begun to notice a failure in a key component of our device. However, this failure could never be harmful to the patient or become a safety issue. There's no increased risk to the patient or physician. Basically, it's a matter of effectiveness which necessitates the customer sending in the unit for service/repair.

We have addressed this by changing the design of the component. We have an ECN going on the changes with production controls in place to make the updated component.

We are going to analyze our data of the last few years and try to find out if the component failures are happening at less than a year or if the components are lasting longer than a year. Our warranties on the device are usually for a year or two years.

In your opinion, are we roaming into territory where a device recall w/ removal is necessary or should we simply send out an advisory notice to all customers regarding this component issue? Should our procedures have a threshold of x% failures which necessitate a mandatory recall? Is this all a moot point since the failure here does not constitute any risk to the user and patient?

Lastly, do you believe our current actions would satisfy the FDA? If not, what more can/should we do?

If you made it through all of that verbiage, thanks for your time and thoughtfulness. :)
 
Elsmar Forum Sponsor
M

MIREGMGR

#2
Presumably you've already reviewed the FDA guidance on this. You may have a Correction situation. In any case, you should write up a memo-to-file, explaining the situation and why you think it's X and not Y. You should prepare an addendum to your risk management file, covering why the situation doesn't constitute an increased safety risk to patients or clinical personnel.

Note that in some instances, a device-loss-of-effectiveness situation can constitute an increased risk to the patient, if clinical personnel may be using your device in a context where its failure to perform as expected, or at all, might result in ineffective or inadequate patient care.

As to what further to do, the FDA has a number of Regional, District and Field offices. Go to the CDRH webpage, and do a search on FDA and your nearest major city name. Or, call DSMICA. What you want is the phone number of the Medical Device Recall Coordinator that covers your location. Call them up and have a discussion. We've done so a couple of times, with uniformly useful and informative results.
 
A

aoldendo

#3
"Note that in some instances, a device-loss-of-effectiveness situation can constitute an increased risk to the patient, if clinical personnel may be using your device in a context where its failure to perform as expected, or at all, might result in ineffective or inadequate patient care."

This is certainly our greatest concern at the moment.

After we have performed our analysis of the situation, I will definitely look into calling the nearest coordinator or FDA office for their take on the situation.

Thanks again MIREGMGR!
 
Thread starter Similar threads Forum Replies Date
K Class II Medical Device Compatibility Issue - Removal or Market withdrawal? US Food and Drug Administration (FDA) 2
P MedWatch Report from a hospital due to a quality issue US Food and Drug Administration (FDA) 5
Marc Media Gallery Issue? Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 1
M "Issue & continuous improvement" columns in AIAG-VDA PFMEA form FMEA and Control Plans 4
R Do we need issue ECN (Engineering Change Notice) towards updated Material Specification? Design and Development of Products and Processes 2
R Problem solving activity - Three hours to fix the issue Manufacturing and Related Processes 15
I Reissuing documents due to missing version / issue numbers Document Control Systems, Procedures, Forms and Templates 3
Marc Fuel tank issue (FOD) hits Boeing’s 737 MAX - Feb 2020 World News 19
F Struggling with a root cause analysis - Customer Returns - Escape issue Problem Solving, Root Cause Fault and Failure Analysis 15
Ron Rompen 2D matrix issue - Parts (machined steel) returned from the customer Design and Development of Products and Processes 0
G PolyWorks Alignment Issue - How to align the part General Measurement Device and Calibration Topics 1
M Accredited Calibration Sevice Provider using computerized system to issue calibration certificate Qualification and Validation (including 21 CFR Part 11) 3
M Accredited Calibration Sevice Provider using computerized system to issue calibration certificate General Measurement Device and Calibration Topics 2
A External Auditor issue with Internal Audits Internal Auditing 7
V Every good documentation practice observation is an data integrity issue US Food and Drug Administration (FDA) 7
V What is the criteria to cite an good documentation practices observation as an data integrity related issue US Food and Drug Administration (FDA) 6
A Domain of the component (EASA CM No.: CM-SWCEH-001 Issue 01 Revision 02) Point 9.3.3 (Usage domain aspects) EASA and JAA Aviation Standards and Requirements 0
B How to reply NCR on ineffectiveness of corrective action during IATF external audit? This is repeated issue whereby some mistake was done. IATF 16949 - Automotive Quality Systems Standard 7
J Control of nonconforming product issue (AS91000) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
C TL-9000 Certifying Body Issue - Auditor failed to find an issue for 10 years TL 9000 Telecommunications Standard and QuEST 16
E Determining what is good and what is bad can be subjective - when is it a quality issue? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
Ed Panek Sensitive Supplier Issue - Single source supplier ISO 13485:2016 - Medical Device Quality Management Systems 6
B NB won't issue CE Certificate or return phone calls CE Marking (Conformité Européene) / CB Scheme 3
A Drawing Issue with Supplier - xb file did not match that of the pdf drawing Nonconformance and Corrective Action 4
J MAG 6 and EASA Part-145 Issue 005. EASA and JAA Aviation Standards and Requirements 0
A ISO/IEC 27001 - Issue during implementation of system IEC 27001 - Information Security Management Systems (ISMS) 3
M Saturated salts issue - Humidity Chamber General Measurement Device and Calibration Topics 5
N Do I need to approach galvanized steel sheet flatness issue with DOE? Problem Solving, Root Cause Fault and Failure Analysis 9
Sidney Vianna ASQ apparently doesn't know ISO does not issue ISO 9001 certificates? ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 4
D Can an AS9100 auditor issue an NCR a month after the audit? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
J Can you stock parts without an 8130 and issue one at time of sale? Federal Aviation Administration (FAA) Standards and Requirements 2
R How many Corrective Action Request can be Issued by DCMA for a single issue? Nonconformance and Corrective Action 2
K NCR or CA? We're taking any issue we have and saying its a nonconformance Nonconformance and Corrective Action 11
R DCMA QAR Service Issue - Resident Inspectors absent from the plant AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
R Wet Signature Document Attachments in SAP - Risk on Data Integrity issue? Records and Data - Quality, Legal and Other Evidence 6
Mikishots Definition Issue - "Issue" vs. "Risk" in ISO 9001:2015 and AS9100 Rev D (Definitions) Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
F Power Cord Length Issue - Medical Device Electrical Safety IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
D Breach of Contract from Registrar (Auditor Payment Issue) Registrars and Notified Bodies 18
T EASA TAG Block 11 Status/Work issue Quality Manager and Management Related Issues 1
M Issue with CAPA system - Should Over Due CAs warrant a CAPA? Nonconformance and Corrective Action 17
S Could I issue major finding for Inadequate Procedures Supplier Quality Assurance and other Supplier Issues 17
G IEC 60601-1-2 Sample Size issue Other Medical Device Related Standards 1
M Repeatability issue in Gage R&R study for inner diameter of a bushing Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
G Out of Dimensional Tolerance - MRB Audit Issue Nonconformance and Corrective Action 11
P Cross Section Issue - Dissecting a plastic part for measurement Manufacturing and Related Processes 4
R Supplier Process Review and Issue Communication SOP/Form help wanted Supplier Quality Assurance and other Supplier Issues 4
L Excel 2013 file issue - Information in the drop down menu disappears Excel .xls Spreadsheet Templates and Tools 2
J Clear Zinc Plating Corrosion issue...Need some education Manufacturing and Related Processes 4
T Excel Conditional Format Issue Excel .xls Spreadsheet Templates and Tools 16
W Profilometer Surface Roughness Tester Issue - Ball Bearings ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7

Similar threads

Top Bottom