Who has had a Transition Audit from TS 16949 to IATF 16949

LUV-d-4UM

Quite Involved in Discussions
#91
We had completed the transition audit to IATF16949 for one facility. There were about 6 minors. One of the minor is the internal audit effectiveness at the facility. But the justification for it to be minor was that the audits of the Remote Support Locations were very comprehensive.
 
Elsmar Forum Sponsor

Sidney Vianna

Post Responsibly
Staff member
Admin
#94
The latest IATF Transition Strategy document, Revision 6, now allows for transfer of CB's under some circumstances:

The Transition Strategy states an organization cannot transfer and have a transition audit to IATF 16949 at the same time. Can a certified ISO/TS 16949 organization transfer to a new certification body and have the new certification body conduct an initial certification audit instead?

In light of capacity and workload constraints during the IATF 16949 transition period, the IATF has approved allowing organizations to transfer to a new IATF-recognized certification body through an approved waiver by the relevant Oversight Office of the new certification body under special circumstances.

Currently, the only special circumstance allowed is where the organization’s current IATF recognized certification body has communicated in writing to the organization that it cannot accommodate the IATF 16949:2016 transition audit.

In this special situation the following IATF Rules 5th Edition requirements do not apply and are therefore waived: 7.1.1 c), d) and e). All transition audit requirements described in this document shall be applied.

NOTE to the new IATF-recognized certification body: In this special situation the IATF database semi-automated transfer request process is not to be applied but a CB waiver is to be approved instead by the relevant IATF Oversight Office (incl. the objective evidence that the current certification body is unable to accommodate the IATF 16949 transition audit). The approved waiver shall be entered into the IATF database.
 

S. Moore

Quality Assurance
#98
I need to know how many days it take to get a semi annual surveillance ISO 9001 and an IATF 16949 audit with the two of them having different scopes? Normally they are done together and it is 2.5 days but it appears to have changed.
 

Stijloor

Staff member
Super Moderator
#99
I need to know how many days it take to get a semi annual surveillance ISO 9001 and an IATF 16949 audit with the two of them having different scopes? Normally they are done together and it is 2.5 days but it appears to have changed.
You may need to contact your Registrar/Certification Body for this.
You are paying them for their service. Get their response in writing!
 

S. Moore

Quality Assurance
You may need to contact your Registrar/Certification Body for this.
You are paying them for their service. Get their response in writing!
That is why I am asking; we have always done them together and after the transitional audits to ISO 9001:2015 and IATF 16949:2016 I got my certificates and they had changed my scope on my certificate. I have been told that now I have to have an additional .5 days added for ISO 9001:2015 in order to cover my Technical side of things. Both the above certificates have the same scope now; when they use to have different scopes. Both automotive and the technical go through the exact same processes just different types of fabric. The audits themselves are no different than they use to be except for the updated parts in the standard.
 
Thread starter Similar threads Forum Replies Date
T Has anyone completed the AS9100D Quality Manual transition? Quality Management System (QMS) Manuals 1
BeaBea ISO 9001 Customer Feedback Methods - What has worked for your company? Service Industry Specific Topics 16
S Has anybody done IMS - Management Review Meeting ISO 14001:2015 Specific Discussions 8
M Has anyone has been through an MDR audit? (3/2020) EU Medical Device Regulations 1
M Has anyone heard of Run at Risk? Manufacturing and Related Processes 14
B ASA Aviation Supply Association - Has anyone heard of ASA? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
B Has anyone done an IEC 60601-1 gap analysis to IEC 60335? Medical Device and FDA Regulations and Standards News 4
Z 510(k) usage - Company has 2 physically similar products Medical Device and FDA Regulations and Standards News 2
D Has anyone had sudden challenges from Korea-MFDS? Other Medical Device Regulations World-Wide 1
Sidney Vianna IAQG News IAQG has a new website - December 2019 AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 0
Richard Regalado ISO 22301:2019 has been published - Nov 2019 Business Continuity & Resiliency Planning (BCRP) 0
S FAIR - If we have not produced a part in over 2 years, but nothing has changed AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
Nicole Desouza Who has to be compliant with REACH Declarations? REACH and RoHS Conversations 11
CycleMike GD&T - Hole pattern - Print (attached) has a single Datum Reference Frame Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
A Would an MRP system that has been in use for over 10 years require validation? ISO 13485:2016 - Medical Device Quality Management Systems 6
W Informational VDI 2017 - Medical Grade Plastics - German VDI has published a "Richtlinie" Other Medical Device Related Standards 1
D FDA Biomarker Qualification Program - Has anyone prepared an application? Medical Device and FDA Regulations and Standards News 0
U Hand-Held dosing device has no PATIENT - Interpretation of the PATIENT definition IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
L Has anyone heard of the 2 pan system? Manufacturing and Related Processes 6
N Technical File Reviewer has requested more testing to ISO 10993 Other Medical Device Related Standards 10
I Who has had to move from ISO 9001:2015 to ISO 13485 and what were the challenges? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
M Informational Health Canada has launched an e-Learning tool to aid in understanding the premarket regulatory requirements for medical devices in Canada Medical Device and FDA Regulations and Standards News 0
M Has anyone here assessed the latest Abbreviated 510(K) guidance document? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
M Does anyone has a good verification and validation plan template? ISO 13485:2016 - Medical Device Quality Management Systems 3
Sidney Vianna Informational UTC ASQR Rev.11 has a mistake; certification of distributors to IATF 16949 AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 0
lilybef FDA and Biocompatability Testing - Reviewer has requested implantation testing Other Medical Device Related Standards 11
D Has anyone undergone a BARDA (HHS) audit as part of their grant process? Other Medical Device Regulations World-Wide 0
Sidney Vianna LinkedIn bug - Anyone has any idea of how to fix this? Posts not showing for me in a Group feed. Coffee Break and Water Cooler Discussions 2
M FDA News FDA Report - FDA Has Taken Steps to Strengthen The 510(k) Program Other US Medical Device Regulations 0
C Has an amended version of IEC 60601-1-6 TRF been released for use in conjunction with IEC62366-1:2015? Human Factors and Ergonomics in Engineering 0
planB ISO 10993-1:2018 has just been published Other Medical Device Related Standards 2
S ISO 13485 Consultant Question - The company has 5 part time employees ISO 13485:2016 - Medical Device Quality Management Systems 1
K Has anyone used QAI for training? Training - Internal, External, Online and Distance Learning 7
Q MHRA has released a new guidance document related to 'GXP' Data Integrity EU Medical Device Regulations 3
B FDA Philippines has no check or balance outside the health department Supplier Quality Assurance and other Supplier Issues 3
S Doubts about SPC taken in Machining - Part has +-0.01 Tolerance Statistical Analysis Tools, Techniques and SPC 5
D Has anyone here had any experience with PQ-FMEA software? FMEA and Control Plans 1
P NPR Metric - What if Customer has relaxed measure? TL 9000 Telecommunications Standard and QuEST 1
D EU Harmonized Standards to which a company has declared compliance EU Medical Device Regulations 13
N Customer Survey Question Has Me Stumped - Compliance with Laws and Regulations Customer and Company Specific Requirements 4
B Records Destroyed - Hurricane Harvey has likely destroyed our Quality Systems Records Records and Data - Quality, Legal and Other Evidence 10
S Has anyone completed IATF 16949 Certification - Share your Audit Experience? IATF 16949 - Automotive Quality Systems Standard 2
B Procedure Pack - KIT - Each has its own CE Mark CE Marking (Conformité Européene) / CB Scheme 6
E Print only has Reference Dimensions Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
S Has anyone created a Turtle Diagram reflecting the new ISO 9001:2015 Structure? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
M Has anyone done a Gage R&R for Spectrophotometer? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
M Remote Office only has Invoice Function - Audit Needed? IATF 16949 - Automotive Quality Systems Standard 0
W CPU BIST IEC 62304 - Embedded code has CPU instruction tests IEC 62304 - Medical Device Software Life Cycle Processes 2
D Has anyone taken the AS9100 Delta course / exam? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 37
howste AS9110 Rev C has been released and is available for purchase - November 2016 AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 0
Similar threads


















































Top Bottom