Wire Holder for Resistance Measurement of Stranded Aluminum Wire

A

AYDOSE

Involved In Discussions
Hello,
I am looking for the proper wire holder type to measure resistance of stranded aluminum wire. the problem is; we cannot obtain reliable/ repeatable results with our current wire holders which is suitable for copper conductors. Can anyone help please?

Thank you in advance.
 
Miner

Miner

Forum Moderator
Leader
Admin
You may need something that will consistently penetrate the thin layer of aluminum oxide on the surface of the strands. While it is not normally detrimental to carrying current, it might interfere with precision electrical measurements.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
A MSA for wire crimp pull test. Lean in Manufacturing and Service Industries 0
A MSA for wire crimp pull test Lean in Manufacturing and Service Industries 1
S Wire harness PPAPs Manufacturing and Related Processes 1
M UL recognized Wire, but no Dielectric breakdown Specified By Manufacturer IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
S IPC 620 Wire Harness assembly and Installation Manufacturing and Related Processes 0
M MSA on wire pull & ball shear Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
was named killer Wire Bonding Machine Provider Approved Vendor? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
M Attempting to Poke Yoke a wire crimping process...need help Design and Development of Products and Processes 3
S Detachable lead wire in ECG IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
N Triple insulated wire for transformer isolation IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
E IPC/WHMA-A-620C: Requirements and Acceptance for Cable and Wire Harness Assemblies Other ISO and International Standards and European Regulations 2
N Thermocouple Wire Calibration - Hot Junction vs. Cold Junction Temperatures General Measurement Device and Calibration Topics 1
J Manufacturing Safety Wire Training and Certification - Who should train Manufacturing and Related Processes 4
N Thermcouple Wire Calibration with a Fluke 753 General Measurement Device and Calibration Topics 0
K Problem with Cable Composed of Coextruded Litz Wire and Tube Manufacturing and Related Processes 1
4 In-House Thread Wire Calibration General Measurement Device and Calibration Topics 5
D Wire/Conductor Elongation Tester Verification General Measurement Device and Calibration Topics 2
I How to determine the thread wire size needed - Buttress Thread Gauge General Measurement Device and Calibration Topics 3
M Wire Harness Line Process and Inspection Criteria Manufacturing and Related Processes 9
optomist1 Typical Wire Harness Testing and Validation Testing for Automotive Applications Reliability Analysis - Predictions, Testing and Standards 8
WEAVER Thermocouple Extension Wire for Temperature Measurement in an Oven General Measurement Device and Calibration Topics 9
W UL standard for Lead wire - meaning of UL numbering, AWG#, no. of conductor, etc Various Other Specifications, Standards, and related Requirements 1
Stijloor Date Stamping Wires and Wire Harnesses Manufacturing and Related Processes 3
T Thread Wire Measurement - 3 Wire Method for BSPP Threads General Measurement Device and Calibration Topics 1
P Medical Device Insulated Wire Flammability Classifications FV-1, VW-1 and FT-1 (CSA) EU Medical Device Regulations 3
R Dielectric Strength of Triple Insulated Wire to comply with 2MOPP IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
T Preventing Wrong Terminal Crimped on a Wire Harness Manufacturing and Related Processes 7
T Constant for a M3x.35 Set Plug using the "Three-Wire Method" Calibration and Metrology Software and Hardware 2
K Measuring of Wire Crimp Height Capability, Accuracy and Stability - Processes, Machines, etc. 7
Z ISO 3108 Wire Rope Tensile Test Methods General Measurement Device and Calibration Topics 3
S Wire Pull Tensile Testing - Splice with multiple wires Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
S Need help with Japanese Specification - Wire callout of "SWIC-F-SW-C" Customer and Company Specific Requirements 4
G How do I calculate PPM from a Rolled Wire Suppllier Supplier Quality Assurance and other Supplier Issues 3
S Best wire size for 'three wire method' to measure pitch dia. of asymmetrical thread General Measurement Device and Calibration Topics 2
S 3 Wire Pitch Dia. Method - Measuring Force Correction & Lechowski?s method General Measurement Device and Calibration Topics 1
V Validation of Molding Process for Manufacturing Cable and Wire Harness ISO 13485:2016 - Medical Device Quality Management Systems 7
R Laser Mic - Limitations & what should we look out for (round wire, 0.250 and under) Capability, Accuracy and Stability - Processes, Machines, etc. 4
C Gauge R&R %Tolerance Template for One-sided Tolerance - Wire Pull Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
J Protective Earthing for Medical Device with two wire power cord in metal enclosure IEC 60601 - Medical Electrical Equipment Safety Standards Series 9
I Do we need GOOD and BAD Wire Harness "Dummy" Samples? IATF 16949 - Automotive Quality Systems Standard 3
M IPC-A-610 vs. Our Specification - Not Staking Wire through a Bifurcated Terminal Various Other Specifications, Standards, and related Requirements 4
A Gage to Measure Wire Straightness needed Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
C Braided Wire Sheathing Specifications Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
F Determining the Number of Samples for receiving large lots of wire? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
H Testing the Durability and Strength of Copper Wire Manufacturing and Related Processes 2
Z Getting NADCAP for wire EDM only (already AS9100) Quality Manager and Management Related Issues 7
R 3 Wire Thread Measuring System - Gage Calibration General Measurement Device and Calibration Topics 8
T What is the Best Method for Wire Insertion? Effective Process Manufacturing and Related Processes 7
T Wire Harness Inspection Method Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
N Does the AS9102 FAI requirement apply to wire assembly sub-kits? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6

Similar threads

Top Bottom