Your help is needed to apply ISO 26262 to a new project.

P

Pinenboa

#1
I have to perform documents relative to this standard (Safety plan, Safety Verification and Validation planning and plan etc.).
Could you subject me some templates explaining the content? More detailed than the iso?
Thanks in advance for your help
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#2
Re: Your help is need to apply the ISO 26262 to a new project.

I haven't dealt with this standard. Hopefully someone else here has.
 
M

MIREGMGR

#4
Re: Your help is need to apply the ISO 26262 to a new project.

This is an automotive-specific standard...would it make sense to put this inquiry in the TS16949 section?
 

Stijloor

Staff member
Super Moderator
#5
Re: Your help is need to apply the ISO 26262 to a new project.

I have to perform documents relative to this standard (Safety plan, Safety Verification and Validation planning and plan etc.).
Could you subject me some templates explaining the content? More detailed than the iso?
Thanks in advance for your help
Here is a presentation that may help.

Stijloor.
 

Attachments

Last edited:
H

HansOlaf

#6
Hi Pinenboa,

we are quite experienced here with this draft standard, that has been published as DIS in July. To help you, I'd need a little more information, i.e. what kind of project you are executing ("item" or "part" development)? Have you or someone else done a preliminary safety analysis? Did you perform an ASIL determination? That kind of answers we'd need to guide you more concrete. If you want, you could contact us directly.

Best Regards, Olaf
 
I

isabulg

#7
Hi Olaf,

we are more and more pushed to aplly this standard in our development of ICs, but we do not have the understanding yet. Do you know a company that is helping to understand this standard ?
Thanks a lot for your help
 
V

vanputten

#8
How is everyone doing all this stuff to a draft standard? There sure is a lot of excitement about this standard. We have cusotemrs pushing us to comply - to a DRAFT standard!!!!

Ready, Fire, Aim.
 
M

marianir

#9
Hi Olaf,

we are more and more pushed to aplly this standard in our development of ICs, but we do not have the understanding yet. Do you know a company that is helping to understand this standard ?
Thanks a lot for your help
Hello isabulg !

It's quite interesting to see questions like this. I'm guest member of the ISO 26262 international working group and especially I work in the sub-group related to part 5 (HW). My task is to interprete the ISO rules for Integrated Circuits such as ASICs, MCUs, FPGAs etc....

Are you still interested in that topic ? Which kind of IC are you developing ?

Best regards
Riccardo
 
P

Pinenboa

#10
I want to sincerely apologise to all for missing to answer you. It was due to the fact that I am very busy (overrun of my activities) but this is no excuse.

First sorry for my English, my excuse (even if not a real excuse) I am French.... so non-French people working with French people, in English, should understand my handicap. But also it is not a generality. So you would understand also that it is difficult to me to contact us directly, I could prefer contact you by e-mail please.

Seriously, I am working on electronically controlled suspension project at System and Hardware development level. I have already performed/executed a preliminary risk analysis. I have done a Safety analysis and perform an ASIL determination. With a colleague, we have trying to define safety goals and determine safety cases.
But now, I have to write a safety plan and it is very difficult without template even if the ISO gives us some indication, it's very confusing for me! I believed to find a support with Internet but this standard is very new and more complex. So please, could you give me your support on this specific document?
Thanks you a lot for your help and your comprehension.

Thanks you also to Stijloor for your document, it was interesting.
 
Thread starter Similar threads Forum Replies Date
D Help needed for Compliance Road-Map - Startup making their first device (IVD) IEC 62304 - Medical Device Software Life Cycle Processes 1
V Root Cause help needed - Sheet metal breaking at press Problem Solving, Root Cause Fault and Failure Analysis 9
W TL9000 transition from 5.5 to 6.0 - help needed TL 9000 Telecommunications Standard and QuEST 1
K Processing Time Tracking Software Program Help Needed Lean in Manufacturing and Service Industries 3
N VDA 1 Critical Characteristics Requirements Help needed VDA Standards - Germany's Automotive Standards 6
G Help needed on 2 TS 16949 Elements - 7.5.5 & 7.5.3 IATF 16949 - Automotive Quality Systems Standard 2
R Excel 2003 and Capability Studies for Dummies - Help needed! Excel .xls Spreadsheet Templates and Tools 4
R ISO 13485 Software Validation Requirements - Help needed ISO 13485:2016 - Medical Device Quality Management Systems 4
D Generating a detailed Process Plan - Help needed Process Audits and Layered Process Audits 6
R ISO 9001 Implementation in the Bus/Coach Industry - Confused and Help needed ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
O ISO 9000 section 7.2.1(c) Compliance help needed ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
E Help needed on the TS 16949 External Auditor Exam IATF 16949 - Automotive Quality Systems Standard 8
Q Regression Analysis for the Attached Data - help needed - TIA Reliability Analysis - Predictions, Testing and Standards 13
S Interpreting Level of Confidence - Round Robin for Tensile Testing - Help needed Statistical Analysis Tools, Techniques and SPC 4
J ISO 9001 and Improvement of Business Performance - Research help Needed ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
S Dew Point Meter: DPL4000 - help needed Manufacturing and Related Processes 1
W Australian Approval for Class I Medical Device - Help needed. Other Medical Device Regulations World-Wide 1
R Student Question - Help needed with statistics questions Statistical Analysis Tools, Techniques and SPC 6
L Definition Throughput Yield (TPY) or First Pass Yield Calculation - Help Needed Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
P Sample Size Calculation help needed Reliability Analysis - Predictions, Testing and Standards 4
6 Preventive Action - Help Needed. Input for Training and Sustenance Preventive Action and Continuous Improvement 3
R ISO 13485 Surveillance Audit Nonconformances and Report Help Needed ISO 13485:2016 - Medical Device Quality Management Systems 9
V Help needed with ISO 14001 Procedures please ISO 14001:2015 Specific Discussions 7
A Help needed for Fighting a specifically identified Organism found during Dose Audit Miscellaneous Environmental Standards and EMS Related Discussions 2
D AASHTO R18 Accreditation (quite similar to ISO 17025) QMS - Help needed ISO 17025 related Discussions 4
L Gage Linearity and Bias Study Analysis - Minitab help needed Using Minitab Software 4
H Husky 1750PSI Pressure Washer - Help needed! Manufacturing and Related Processes 3
L Medical Device FDA Product Classification help needed 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S Cross Tabulation in Attribute MSA - Help Needed Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
S Trend Review and Process Improvement help needed Capability, Accuracy and Stability - Processes, Machines, etc. 6
L Easy Access of Obsolete Documents - Corrective Action help needed ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
T FDA Single Use Instruments - Classification Help Needed 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
T PFMEA of Die casting Process--Help needed? FMEA and Control Plans 5
P Design FMEA (DFMEA) Basics - Help needed IATF 16949 - Automotive Quality Systems Standard 3
K ISO 13485 Audit help needed General Auditing Discussions 20
U Issue with Labelling of Outer Container - help needed for clarification EU Medical Device Regulations 3
B 5 Why help needed Please kindly review Problem Solving, Root Cause Fault and Failure Analysis 15
S Excel Spreadsheet Conditional Formatting help needed Excel .xls Spreadsheet Templates and Tools 12
G Help needed to complete a Financial Audit of a Nonprofit Organization Various Other Specifications, Standards, and related Requirements 7
K Low Volume Products Data Analysis help needed Statistical Analysis Tools, Techniques and SPC 6
somashekar Water and Air Pollution Load Calculations help needed Miscellaneous Environmental Standards and EMS Related Discussions 6
S Master Document Register Project Procedures help needed Document Control Systems, Procedures, Forms and Templates 2
Ajit Basrur Tabulating Improvement Plan Status - Help and suggestions needed Excel .xls Spreadsheet Templates and Tools 9
R Sample Audit Report of an Investment Company - Audit help needed Document Control Systems, Procedures, Forms and Templates 1
E FDA New Product Introduction Regulations help needed 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
R Process VSM (Value Stream Mapping) help needed Lean in Manufacturing and Service Industries 5
K Virtual DMIS vs. PC-DMIS - Help needed Calibration and Metrology Software and Hardware 3
T Excel Time Calculations and Formulas help needed Excel .xls Spreadsheet Templates and Tools 15
C TS 29001/API spec Q1- help needed Oil and Gas Industry Standards and Regulations 1
P HiPot Calibration help needed General Measurement Device and Calibration Topics 10

Similar threads

Top Bottom