Zero Acceptance Sampling Plans 5th edition by Squeglia - Question

R

Rand T

#1
I am working on establishing a sampling plan based upon the c=0 Zero Acceptance Number Sampling Plans by Squeglia.

I had a copy of the tables from the 4th edition and was considering using them as the basis for our own internal sample size plan. These correspond with what we had been doing for the most part, so I was just trying to document the justification on how our plan was developed.

However, I just ordered the latest edition of the book (5th Edition) and the table has different values in just a couple locations.

I am looking at using the AQL level of 1.0 and Lot sizes of 91-150. The 4th edition lists a Sample size of 13 pcs. while the 5th edition has changed that to 19 pcs. There is no information anywhere in the book that states why that was changed.

Our lot sizes are usually around 125 or less, and all our current forms use 13 pcs, so I was hoping that we could continue doing what we have been doing.

Does anyone know why it was changed?
 
Last edited by a moderator:
Elsmar Forum Sponsor

Statistical Steven

Statistician
Leader
Super Moderator
#2
Re: Question about Zero Acceptance Sampling Plans 5th edition by Squeglia

I am not familiar with the tables in the book, but based on the binomial distribution, for a sample size of 13, the AQL is 0.39% with a LQ of 16.2%. A sample size of 19 would reduce it to AQL of 0.27% and LQ ofd 11.4%. A sample size of 6 would give an AQL of 1% with LQ of 36.8%. I will see if I can find the book so I can review the tables.
 
Thread starter Similar threads Forum Replies Date
B IATF 16949 Cl. 8.6.6 - Acceptance Criteria - Zero Defects Attribute Data Sampling IATF 16949 - Automotive Quality Systems Standard 2
V C=0 Zero Acceptance Number Sampling Plan - Question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M Zero Acceptance Number Sampling Plans for Isolated Lots Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
P Zero Acceptance Number Sampling Plans, Fifth Edition (e-Book) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
K Design of Lot Acceptance Sampling Plan - Zero Acceptance Number Sampling Plans Inspection, Prints (Drawings), Testing, Sampling and Related Topics 27
Marc Zero Acceptance Number Sampling Plan - C=0 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
D Zero Acceptance Sampling - Is anyone is actually using this? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
P Zero Acceptance Sampling Plan By N.L. Squeglia Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
G Has anyone heard of the Squeglia Zero (c=0) Acceptance Sampling Plan? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
U Zero Acceptance number procedure for Attribute Sampling Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
Marc MIL-STD-1916 "Acceptance on Zero (AOZ) Sampling Inspection" Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J Acceptance Criteria for Attribute Data Sampling Plans shall be Zero Defects Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
S Justifying the AQL for a Zero (C=0) Acceptance Plan (Medical Device) AQL - Acceptable Quality Level 6
T Net Zero Miscellaneous Environmental Standards and EMS Related Discussions 7
C Can I reduce P1 to zero? ISO 14971 - Medical Device Risk Management 15
normhowe "The Problem with Quality Management: Process orientation, controllability and zero-defect processes as modern myths" Book, Video, Blog and Web Site Reviews and Recommendations 2
E Zero part to part variation - Gage R&R project Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 15
P ISO 9001 certification with zero customers? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
D Certifying a "virtual" company with zero employees ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
Sam Lazzara Time Zero testing in med device aging studies Qualification and Validation (including 21 CFR Part 11) 3
C Are zero defect sampling plans relevant to AS9120B Distributor AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
M Zero Defect Sampling Plan Standards Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
WCHorn Changing Sampling Accept Number to Zero, Arbitrarily AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 15
F Zero to certification in 6 months! Covegratulations 5
C ISO 9001:2008 Audit Major Finding - Dial Calipers not set to zero ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
R Can Cp and Cpk be zero? Capability, Accuracy and Stability - Processes, Machines, etc. 10
W Zero setting of correlation graph when plotting best fit linear regression Statistical Analysis Tools, Techniques and SPC 7
M Zero Tolerancing on True Position using MMC (Maximum Material Condition) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
P Rounding Uncertainty to Zero on a Calibration Certificate Measurement Uncertainty (MU) 7
L What is the Cpk for Zero Defects Six Sigma 4
optomist1 Differences and Advantages of using a Zero Positional Tolerance at MMC Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
S Getting Zero for GR&R Reproducibility? Using Minitab Software 5
P Minitab error: Zero or negative degrees of freedom Using Minitab Software 16
T Zero Failure Sampling Plans Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M AQL (Acceptable Quality Level) for Zero Defects AQL - Acceptable Quality Level 13
C Can you change all your WI (Work Instruction) revisions back to zero (0) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
S Is "Zero Accidents" a realistic goal? Occupational Health & Safety Management Standards 101
Chennaiite High Technology Visual Inspection for Casting and Forging Parts - Zero Defects Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
M Cpk with LSL (Lower Specification Limit) at zero? Statistical Analysis Tools, Techniques and SPC 3
Q Zero-Based Sampling Plan - Governing document or main reference document Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Definition S-type Tolerance - Unilateral tolerance where the desired value is 0 (zero) Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
C AV equals Zero in Minitab - MSA with 2 Appraisers Using Minitab Software 11
U Zero findings!!!!!!!!!!! First visit back since our registration audit ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
I R-sq Value is Almost Zero - Linearity Study Question Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
D What does Zero Defects mean? TS 16949 Clause 7.1.2 AQL - Acceptable Quality Level 6
Y What is the confidence level for a given AQL in zero sampling plan AQL - Acceptable Quality Level 4
A Is zero defects possible? We are dealing with 25 to 30 parameters Quality Tools, Improvement and Analysis 21
D The difference between zero defect and zero defection? Statistical Analysis Tools, Techniques and SPC 4
J Zero Defect Dating Coffee Break and Water Cooler Discussions 37
G Stuck with Zero Defect target - Manufacturing Waste Target is Zero Inspection, Prints (Drawings), Testing, Sampling and Related Topics 17

Similar threads

Top Bottom