Posts: 19
From:Reedsburg, WI
Registered: Sep 98

posted 18 December 1998 05:10 PM               

---

I am looking at a Certificate of Registration from one of our suppliers. It states:
ISO 9001 Registered Firm
QS-9000 Compliant

What does compliant mean? Is compliant the same as registered? Our Certificate of Registration does not state specifically QS-9000 Compliant. Is there a difference?

[This message has been edited by Jennifer (edited 12-21-98).]

IP: Logged

Posts: 4119
From:West Chester, OH, USA
Registered:

posted 19 December 1998 11:36 AM               

---

QS9000 registration is really ISO9001 registration with a 'QS Addendum'. The cert is OK.

Compliant means the company was audited to the additional stuff called out in QS9000 and is compliant. There really is no such thing (currently) as a QS9000 certification.

IP: Logged

Posts: 19
From:Reedsburg, WI
Registered: Sep 98

posted 21 December 1998 10:45 AM               

---

Thanks Marc - It just seemed confusing that theirs stated compliant and ours did not.

IP: Logged

Posts: 575
From:Seymour, CT USA
Registered: Nov 98

posted 21 December 1998 11:25 AM               

---

Jennifer,

Is QS9000 mentioned anywhere on your Registration Certificate? It seems to me that it should. If it isn't there, I might wonder if your Registrar made a typographical omission. You may want to check that out. I would expect to see something as you mentioned "QS9000 Compliant" or ISO9001 inclusive of the requirements of QS9000. I hope this helps.

IP: Logged

Posts: 202
From:Israel
Registered:

posted 21 December 1998 12:09 PM               

---

Our certificate says"
has been audited by SII(Standards institute of Israel) and found to comply with the Quality Management Standard:ISO 9001 And with the Quality System Requirements QS9000."
This has been accepted by GM.

[This message has been edited by Howard Atkins (edited 12-21-98).]

IP: Logged

Posts: 4119
From:West Chester, OH, USA
Registered:

posted 21 December 1998 12:11 PM               

---

Yes, Kevin - I missed that point. If HER certificate does not state something to the effect that QS was audited, it is definitely an error if it is a QS9000 registration. I was concentrating on the supplier certificate issue. As I stated, "There really is no such thing (currently) as a QS9000 certification."

Thanks for picking that up, Kevin.

IP: Logged

Posts: 19
From:Reedsburg, WI
Registered: Sep 98

posted 21 December 1998 05:51 PM               

---

Yes, ours basically states that KPMG hereby registers Grede Foundries for its quality system described under the QSR QS-9000:1995 and ISO 9002:1994.
I guess I was just hung up between being registered and compliant.

IP: Logged

All times are Eastern Standard Time (USA)