Posts: 4
From:Lexington, MA USA
Registered: Mar 2001

posted 12 March 2001 04:31 PM               

---

Does anyone know where to get a sanctioned format for the Chrysler 7 Step? QS9000, Section II only lists the Steps, but I am looking specifically for a format. My assumption is that since QS does not specify a format, any format is acceptable as long as it addresses the 7 Steps listed in QS.

IP: Logged

Posts: 622
From:Lapeer, MI USA
Registered: Oct 2000

posted 12 March 2001 06:16 PM               

---

As long as you cover the Chrysler 7 steps the format is up to you. You could use Word and design your own form that complies with all Chrysler aspects as well as those that might be needed by you.

Be creative and make the form work for you. One thing we have added is a notation to require that the FMEA be reviewed for each applicable corrective action.

Also check the FTP site, there are probably some sample forms there.

ASD...

[This message has been edited by Al Dyer (edited 12 March 2001).]

IP: Logged

Posts: 4119
From:West Chester, OH, USA
Registered:

posted 12 March 2001 06:25 PM               

---

See NC_DBASE.pdf in the pdf_files directory for some ideas.

IP: Logged

Posts: 244
From:
Registered: Sep 1999

posted 13 March 2001 09:30 AM               

---

Refer to the table on page 65 of the QSR. Also if you are a Tier I supplier I would suggest that you get access to the DC website.

IP: Logged

posted 21 March 2001 04:30 PM              

---

Chrysler has a manual called " the 7 step process ".

But, you can actualy use whatever format as long as you have the 7 Step covered.

Regards

Gerald

IP: Logged

Posts: 4119
From:West Chester, OH, USA
Registered:

posted 21 March 2001 04:34 PM               

---

BTW - You might want to take a read through Elsmar.com/8D/

The 8-D is the same as the 7-D for all intents and purposes.

IP: Logged

Posts: 45
From:Union City, MI, USA
Registered: Jul 2000

posted 18 April 2001 09:28 AM               

---

When we went to our initial meeting with the DaimlerChrysler people we were given a 7D form to submit when the occasion arose. I am not sure if it is universal or only for our commodity (material handling racks). We have only been working with DCX for about a month so this may be relatively new. They also gave us several other forms (Initial Sample Inspection, Balanced Scorecard for our commidity among others). They emphasized that all official correspondence must take place in the prescribed format. I would suggest that people dealing with DCX contact their rep there to see if any of this will apply to them.

Jim Evans

IP: Logged

posted 06 May 2001 08:42 AM              

---

I am a DCX quality specialist... The form you mention can be found on the Extended Enterprise website SPIN website Here is the link http://extranet.daimlerchrysler.com/cgi-bin/english/index.cgi

DCX requires all Extended Enterprise's to use this format only and not alter it's format, however, some suppliers have modified minor tweaks to fit their companies. Most companies find a way to make the form repeatable and mutliple re-issuing of the blank form either in MSword or MSexcel.

Although without a DCX supplier logon ID you won't be able to access this form. Please E-mail me and I will send you an acrobat file of the form... @ [email protected]

IP: Logged

All times are Eastern Standard Time (USA)