digital panel meter

The Elsmar Cove Business Standards Discussion Forums

Welcome to what was The Original Cayman Cove Forums!
This thread is carried over and continued in the Current Elsmar Cove Forums

Search the Elsmar Cove!

This is a "Frozen" Legacy Forum.
Most links on this page do NOT work.
Discussions since 2001 are HERE

The New Elsmar Cove Forums

The New Elsmar Cove ForumsThe Elsmar Cove Forums

17025, Guide 25, A2LA (Cal., Meas., and Test)

digital panel meter

profile | register | preferences | faq

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: digital panel meter
calib Lurker (<10 Posts) Posts: 4 From:Philippines Registered: Mar 2001	posted 28 July 2001 12:42 AM Is calibration of digital panel important in any semicon company? You see these panel meters are used in IR sensor, does it requires a calibration or not? Need help co'z I'm starting to draft a procedure(I was ordered to)on these meters and I don't know if this is only a waste of time IP: Logged
Graeme Forum Contributor Posts: 58 From:Lilburn, GA, USA Registered: Sep 2000	posted 29 July 2001 09:12 PM The fundamental questions you have to ask - and answer - are these: Is the meter used to measure a parameter that is important to the quality of the product? Does it matter if the meter reading is wrong? If what is being measured is important to assure the quality of the product, then the meter must be calibrated. If it matters if the reading is wrong then the meter must be calibrated. Notice that I have not said anything about the TYPE of meter. That is because the type of meter (digital or analog, electronic or mechanical) does not matter when determining the need for calibration. (These factors ARE important, though, when determining the required accuracy and precision.) It also does not matter what your process is. You have to ask the same questions. The only thing that would be a waste of time would be if you answer both of the questions "No" -- because then you have to ask "why am I making this measurement at all?" ------------------ Graeme C. Payne ASQ Certified Quality Engineer [email protected] IP: Logged
Jerry Eldred Forum Wizard Posts: 148 From: Registered: Dec 1999	posted 30 July 2001 08:48 AM As much of my background is in semiconductor related calibrations, please give me some more detail and I will try to give you a good answer. IP: Logged
calib Lurker (<10 Posts) Posts: 4 From:Philippines Registered: Mar 2001	posted 02 August 2001 06:26 PM quote: Originally posted by Jerry Eldred: As much of my background is in semiconductor related calibrations, please give me some more detail and I will try to give you a good answer. IP: Logged
calib Lurker (<10 Posts) Posts: 4 From:Philippines Registered: Mar 2001	posted 02 August 2001 06:33 PM thank's guys. I'll just continue drafting a procedure for these meters IP: Logged

All times are Eastern Standard Time (USA)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Marc Smith | The Elsmar Cove Home Page

Please Visit the new Elsmar Cove Forums! All these threads are there and much more!

Main Site Search

Y'All Come Back Now, Ya Hear? Powered by FreeBSD!