Supplier Quality Assurance Procedures & QS 9000

The Elsmar Cove Business Standards Discussion Forums

Welcome to what was The Original Cayman Cove Forums!
This thread is carried over and continued in the Current Elsmar Cove Forums

Search the Elsmar Cove!

This is a "Frozen" Legacy Forum.
Most links on this page do NOT work.
Discussions since 2001 are HERE

The Elsmar Cove Forums

Documentation

Supplier Quality Assurance Procedures & QS 9000

profile | register | preferences | faq

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: Supplier Quality Assurance Procedures & QS 9000
Kenen Lurker (<10 Posts) Posts: 2 From:San Antonio, TX. USA Registered: Jul 2001	posted 21 August 2001 09:12 AM Hi folks I am new to this group and look forward to being part of it. I am new at a company ( two months) and have been given the difficult task of writing procedures to cover Supplier Quality Assurance activities, PAPP and a system to measure A ranks (show stopper defects) and to be honest I do not have a clue. Therefore I am asking you folks for any samples or procedures you can provide for me. On another subject my Registrar's take on the 3rd edition sanctioned interpretations is that all subcontractors have to be certified to ISO 9001 by the end of 2003. What do you folks say ?? Thanks in advance for your responses. ------------------ IP: Logged
Al Dyer Forum Wizard Posts: 814 From:Lapeer, MI USA Registered: Oct 2000	posted 21 August 2001 09:29 AM Welcome, Not to be flippant (sp) but I would dump the quest for QS-9000 and go for TS-16949. ASD... IP: Logged
JRKH Forum Contributor Posts: 36 From:Cincinnati, Ohio Registered: Apr 2001	posted 21 August 2001 09:38 AM Al, Not everyone has the option on TS. Our customer insists that we go QS. Kenen, Welcome aboard. For your procedures, have you checked the Free Files Directory on this board? I would wager there is something there that would help. James ------------------ Low tech is better than no tech. IP: Logged
tomvehoski Forum Contributor Posts: 33 From:Southfield, MI Registered: May 2001	posted 21 August 2001 09:46 AM quote: Originally posted by Kenen: On another subject my Registrar's take on the 3rd edition sanctioned interpretations is that all subcontractors have to be certified to ISO 9001 by the end of 2003. What do you folks say ?? Thanks in advance for your responses. Who is your registrar? NSF has said the same, plus you have to have a plan to get them into compliance NOW, or else it is a minor NC. I'm trying to find the opinions from other registrars. There are a couple threads about this very subject over in the QS-9000 forum. Tom IP: Logged
Al Dyer Forum Wizard Posts: 814 From:Lapeer, MI USA Registered: Oct 2000	posted 21 August 2001 10:23 AM quote: Originally posted by JRKH: Al, Not everyone has the option on TS. Our customer insists that we go QS. Appreciate the response, the only companies I know of that require QS are automotive, who is you customer? ASD... IP: Logged
Neil Forum Contributor Posts: 10 From:Welland, Ontario, Canada Registered: Mar 2001	posted 21 August 2001 10:40 AM Kenen, The IASG sanctioned interpretation requires ISO9000 certification within 18 months of July 01, 2001. That is the end of 2002 not 2003. To steal a Monty Python phrase, "NO Time to Lose". As for registrar interpretation, try this criteria. ISO9000 for all key vendors plus full development to QS9000 principles for those vendors that control or directly impact on critical characteristics. In some ways this simplifies life because now it avoids some of the ongoing development work to QS9000 principles with those vendors that do not intend to get registered to QS9000. Plus it gives me a criteria and some clout to get rid of some problematic vendors that do not have ISO9000. IP: Logged
tomvehoski Forum Contributor Posts: 33 From:Southfield, MI Registered: May 2001	posted 21 August 2001 11:17 AM When did Monty Python use "NO time to lose"? I thought I had all of their stuff memorized but can't seem to recall this one. IP: Logged
JRKH Forum Contributor Posts: 36 From:Cincinnati, Ohio Registered: Apr 2001	posted 21 August 2001 12:09 PM quote: Originally posted by Al Dyer: Appreciate the response, the only companies I know of that require QS are automotive, who is you customer? ASD... Al, Customer is a large US based Off raod equipment manufacturer. I approached them about Using ISO-2000 as an interem toward gaining TS-16949. My thinking is that ISO-2000 satisfies the vendor requirement in QS, and that TS is going to be closer to ISO-2k than to QS. Their take was that they know that QS meets their requirements, and they don't yet know whether TS will. Therefore the requirement stands to be registered to QS. James ------------------ Low tech is better than no tech. IP: Logged
Al Dyer Forum Wizard Posts: 814 From:Lapeer, MI USA Registered: Oct 2000	posted 21 August 2001 01:22 PM Just from a grizzled quality guy, You do what you do to satisfy customer requirements, more power to you and good luck. ASD... IP: Logged

All times are Eastern Standard Time (USA)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Marc Smith | The Elsmar Cove Home Page

Please Visit the new Elsmar Cove Forums! All these threads are there and much more!

Main Site Search

Y'All Come Back Now, Ya Hear? Powered by FreeBSD!