Packaging Standard - Corrugated Box and Materials as well as Pallets

[kedarg6500]

Dear Folks

I need help. I want to know standard for
1. Inspecting quality of corrugated packing box, edge boards
2. Pallet - wooden, plastic made
3. Testing standard
4. Consumable standard/ inspection method: strapping/wrapping material
5. Storing of corrugated material
6. Guidelines for manufacturer’s raw material (pasting glue, board GSM)
7. Guidelines for corrugated packing box material
Thank you in advance

 

[Stijloor]

Dear Folks

I need help. I want to know standard for

1. Inspecting quality of corrugated packing box, edge boards
2. Pallet - wooden, plastic made
3. Testing standard
4. Consumable standard/ inspection method: strapping/wrapping material
5. Storing of corrugated material
6. Guidelines for manufacturer’s raw material (pasting glue, board GSM)
7. Guidelines for corrugated packing box material

Thank you in advance

Can someone help Kedar?

Thank you very much!

Stijloor.

 

[tomvehoski]

It's been forever since I dealt with packaging (corrugated), but you should be able to find plenty of international standards on these topics by searching the ISO website. (iso.org). ASTM.org would be second source. I know we used to do corner drop, shake table, and other tests on consumer packaged goods.

You may want to search for a qualified packaging engineer nearby to review what you are looking at. Your topics are very broad and probably need on-site review that would be difficult over the internet.

 

[tamale]

You may want to contact the International Corrugated Case Association at:

http://www.iccanet.org/

or the Association of Independent Corrugated Converters at:

http://www.aiccbox.org/

Or the Corrugated Packaging Alliance at:

http://www.corrugated.org/

Or the Asia Corrugated Case Association at:

http://www.acca-website.org/

Or just Google «corrugated association» and you will find plenty of references.

Tamale

 

[kedarg6500]

You may want to contact the International Corrugated Case Association at:

http://www.iccanet.org/

or the Association of Independent Corrugated Converters at:

http://www.aiccbox.org/

Or the Corrugated Packaging Alliance at:

http://www.corrugated.org/

Or the Asia Corrugated Case Association at:

http://www.acca-website.org/

Or just Google «corrugated association» and you will find plenty of references.

Tamale

I am trying to get information,but I want to know how to conduct "Testing and Evaluation of Corrugated Packaging"
1. At Receipt Inspection stage
2. What are the Type Test to be conducted
3. How to validate the Packaging
4. How to conduct Transport-worthiness test for Corrugated Packaging

Kedar

 

[TravisM]

Hi,

Have you looked at the ISTA procedures and testing guidelines?

You can find them at ISTA.org

I'm new here, so can't post links yet, but google can point you in the right direction.

Hope that this can help in some way.

Regards,
Travis

 

[FrankGatlin]

Keydarg6500,

Perhaps this Blog will shed some light on your questions:
floridashippingandpackaging.com/mullen_and_ect_testing/

While there is limited information on every detail of your request, it may be a good place to start.

Good luck on your quest.