Changing Procedures: From QS-9000 to TS 16949

B

blackgoat

#1
TS2 Procedures

I am in the process of changing our current QS procedures over to TS16949 format. Could anybody help me in the approach that I should take, for e.g. if anybody could send to me a copy of there Management Review procedure this would be most appreciated.

e-mail [email protected]

thanks
 
Last edited by a moderator:
Elsmar Forum Sponsor

CarolX

Super Moderator
Super Moderator
#2
blackgoat said:
I am in the process of changing our current TS1 procedures over to TS2 format. Could anybody help me in the approach that I should take, for e.g. if anybody could send to me a copy of there Management Review procedure this would be most appreciated.
Hi blackgoat and Welcome to the Cove:bigwave:

Perhaps you could provide some additional information. I am not familiar with the TS1 and TS2 terms. If you could give us some more details, we will see if we can help.

Regards,
CarolX
 
#3
I am assuming blackgoat is refering to ISO/TS 16949 1st and 2nd editions.


and yes, Welcome to the Cove! :bigwave:
 

CarolX

Super Moderator
Super Moderator
#4
moved thread

This thread was originally posted in the Documention Board. I thought blackgoat might get a better response over here.

Any thoughts, folks?

CarolX
 

howste

Thaumaturge
Super Moderator
#5
The standard does not require a procedure for management review. Instead, I usually have a controlled management review agenda form that is used to control and ensure that the required inputs and outputs are addressed and recorded.
 
G

galcantar

#6
blackgoat said:
I am in the process of changing our current QS procedures over to TS16949 format. Could anybody help me in the approach that I should take, for e.g. if anybody could send to me a copy of there Management Review procedure this would be most appreciated.

e-mail [email protected]

thanks
In the past I used it; maybe it can be as a baseline.
 
B

blackgoat

#7
Many thank's carolx for moving my thread, as you may well know i am new to the site.

howste, anychance of a review of what you use for management review? e-mail address in top thread.

once again guy's THANKS!!
 
P

Paul Vragel

#8
Here is a copy of a form for Management Review.

To help accomplish the responsibilities of the Management Rep, we also give people a form (also attached) which they can distribute to the other managers. This form asks them to highlight issues of which they are aware which should be part of the management review. This helps distribute the work, and also make the Management Review more than a paper exercise.
 

Attachments

Thread starter Similar threads Forum Replies Date
D Changing Text Procedures into Flowcharts ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
P One page quality procedure - Changing format of our quality procedures Document Control Systems, Procedures, Forms and Templates 1
L "Maintain a procedure" vs. procedures ISO 14001:2004 - Changing our EMS Document Control Systems, Procedures, Forms and Templates 2
R Impact of changing manufacturer post clinical investigation CE Marking (Conformité Européene) / CB Scheme 3
D Clothes changing in pharmaceutical factory Manufacturing and Related Processes 8
M Changing supplier of critical raw material (III class device) Other Medical Device and Orthopedic Related Topics 1
Kuldeep Singh Changing the Address in 510(K) Approved Product 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
T AS9100 - Changing PEARs target AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 41
C FDA on changing acceptance criteria re: analytical method validation US Food and Drug Administration (FDA) 1
V Statistical basis and justification while comparing / changing sampling plans Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
K Changing from Procedure based to Process based Competency Evaluations General Auditing Discussions 5
J Steps when changing material for class 1 medical device 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
Marc Email Addresses - Changing your email address Elsmar Xenforo Forum Software Instructions and Help 0
supadrai OEM Changing the name of the manufacturer - length of process? Is 1-3 months correct? Other Medical Device Regulations World-Wide 0
R Changing Document Control software. Must I transfer EVERYTHING? Document Control Systems, Procedures, Forms and Templates 3
A IMDS - Changing the Locked Weight Value RoHS, REACH, ELV, IMDS and Restricted Substances 1
D Changing Templates Approval Field Document Control Systems, Procedures, Forms and Templates 5
P Romer Arm - Profile of a Surface Changing General Measurement Device and Calibration Topics 4
D Changing software classification via software - IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 3
L MINITAB 17 - Changing Data Using Minitab Software 3
S Process validation when changing location ISO 13485:2016 - Medical Device Quality Management Systems 10
D CAPA vs. Risk Assessment - Changing a product material for better performance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
C Changing Registrars Registrars and Notified Bodies 15
MDD_QNA Changing the Layout of Medical Device Label(s) CE Marking (Conformité Européene) / CB Scheme 3
S Keeping track of the changing Medical Device Standards Other Medical Device Related Standards 3
J Changing of our New Hire Orientation Training Records Training - Internal, External, Online and Distance Learning 12
A Changing a Form Template & Updating Records ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
D Is anyone changing their ISO 14001:2004 EMS Policy? ISO 14001:2015 Specific Discussions 8
Q Changing Terminology in ISO 9001:2015 - Documentation Content ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
V Changing Indication of Use for a Class IIa Medical Device EU Medical Device Regulations 2
B Changing out Thermocouple - Is new calibration required? General Measurement Device and Calibration Topics 1
F Rules to respect when changing from Certification Body ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
MDD_QNA Clinical data requirements - Changing a Class I Medical Device to Class II EU Medical Device Regulations 5
shimonv Changing the Label of a Medical Device product in the field Other US Medical Device Regulations 5
E Information required about changing an off shelf part 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
M Changing FMEA template to include Detection Ranking for the PFMEA FMEA and Control Plans 2
WCHorn Changing Sampling Accept Number to Zero, Arbitrarily AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 15
M Amending CFDA Registration for changing site of shipment China Medical Device Regulations 2
S Gage R&R on Potentially Changing Parts - Guidance Needed Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
R Re-registration of medical device in Russia - "changing holder" Other Medical Device Regulations World-Wide 1
R Changing CE Mark on Documentation ISO 13485:2016 - Medical Device Quality Management Systems 2
K Changing the Auditor within a Notified Body ISO 13485:2016 - Medical Device Quality Management Systems 4
B Process Capability - Changing Limits to Improve Cpk or find Root Causes? Capability, Accuracy and Stability - Processes, Machines, etc. 6
M Changing Notified Body - Anyone have stories to share CE Marking (Conformité Européene) / CB Scheme 3
R Changing ISO 9001 Certification Scope Quality Manager and Management Related Issues 4
W Depth Gage Spindle moved when changing Contact Point Calibration and Metrology Software and Hardware 6
M Changing a Chinese Legal Agent China Medical Device Regulations 5
B Changing dimensional tolerances to approve rejected product ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Q How to handle customer request for changing specifications 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
T Change Control Requirements when changing Suppliers IATF 16949 - Automotive Quality Systems Standard 4

Similar threads

Top Bottom