The Cove Business Standards Discussion Forums
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > > >
Forum Username

Elsmar Cove Forum Visitor Notice(s)

Wooden Line

EN 80601-2-13 in relation to an AGSS (Scavenging) product

Monitor the Elsmar Forum
Courtesy Quick Links

Links Elsmar Cove visitors will find useful in the quest for knowledge and support:

Jennifer Kirley's
Conway Business Services

International Quality Services

Marcelo Antunes'
SQR Consulting, and
Medical Devices Expert Forum

Bob Doering
Bob Doering's Blogs and,
Correct SPC - Precision Machining

Ajit Basrur
Claritas Consulting, LLC

International Standards Bodies - World Wide Standards Bodies

AIAG - Automotive Industry Action Group

ASQ - American Society for Quality

International Organization for Standardization - ISO Standards and Information

NIST's Engineering Statistics Handbook

IRCA - International Register of Certified Auditors

SAE - Society of Automotive Engineers

Quality Digest

IEST - Institute of Environmental Sciences and Technology

Some Related Topic Tags
en 80601 - med. electrical equip. for ophthalmic surgery
Thread Tools Search this Thread Rate Thread Content Display Modes
  Post Number #1  
Old 13th October 2017, 05:40 AM

Total Posts: 3
Please Help! EN 80601-2-13 in relation to an AGSS (Scavenging) product

I have some issue with the above standard in relation to an AGSS (Scavenging) product we are having tested.

Para Flow resistance The pressure drop across a LOW-FLOW TRANSFER AND RECEIVING SYSTEM shall be
not less than 10 hPa (10 cmH2O) at 50 l/min,
not greater than 20 hPa (20 cmH2O) at 25 l/min.

I cannot see why we need to have what is in effect a built in back pressure on the exhaust port of the anesthetic system.

Any body able to clarify why this is there?

Sponsored Links

Lower Navigation Bar
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > > >


Visitors Currently Viewing this Thread: 1 (0 Registered Visitors (Members) and 1 Unregistered Guest Visitors)
Thread Tools Search this Thread
Search this Thread:

Advanced Forum Search
Display Modes Rate Thread Content
Rate Thread Content:

Forum Posting Settings
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Emoticons are On
[IMG] code is On
HTML code is Off

Similar Discussion Threads
Discussion Thread Title Thread Starter Forum Replies Last Post or Poll Vote
Pulse oximeters ISO 80601-2-61, is 0% okay for probe fault? thirdplanet US Food and Drug Administration (FDA) 4 19th July 2018 10:10 AM
What are Single Fault Conditions and how to test - IEC 80601-2-13 mvroops Other Medical Device Related Standards 0 3rd August 2017 09:39 AM
Is IEC 80601-2-60 necessary for Dental Laser? Athir IEC 60601 - Medical Electrical Equipment Safety Standards Series 2 24th July 2014 07:43 PM
What is the relation between MDD 93/42/EEC and Biocide 98/8/EC YAZ YAZ EU Medical Device Regulations 5 28th May 2013 03:16 AM
Relation between 93/42/EEC and 2007/47/EC Cinti EU Medical Device Regulations 21 30th July 2009 02:48 PM

The time now is 12:12 AM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.

Misc. Internal Links

NOTE: This forum uses "Cookies"