I am seeking a clarification on SAT vs Load sensor usage on instrumentation type "B"
Refer to the type B instrumentation, the additional load sensor will be performed.
However, if we select Type N,K sensor which will be restricted the usage per 3.5.1.3 defines to use the sensor at 1260 deg.C = 1 time
At the time we do the SAT - it is counted as 1 use. That means we cannot operate the furnace at that temperature? How can we comply this
Anyway, does the noble metal (Type R,S) load sensor be way to comply this requirement? because there has no restriction for noble metal non-expendable sensor, but It is quite rare to find people using type S as load sensor.
Refer to the type B instrumentation, the additional load sensor will be performed.
However, if we select Type N,K sensor which will be restricted the usage per 3.5.1.3 defines to use the sensor at 1260 deg.C = 1 time
At the time we do the SAT - it is counted as 1 use. That means we cannot operate the furnace at that temperature? How can we comply this
Anyway, does the noble metal (Type R,S) load sensor be way to comply this requirement? because there has no restriction for noble metal non-expendable sensor, but It is quite rare to find people using type S as load sensor.
