D
dwright48313
While I have seen similar questions I did not see this one asked and answered so forgive me if I missed it.
We PPAP'd and received approval on a part in 2014. We have only ran that part that one time in 2013 and have not ran or shipped parts since. The customer has now placed an order for that part however they had internally changed the part number which we found out when they sent out the latest releases. They did not provide us with a new or updated print with this part number included on it they just issued a new PO with both part numbers listed on it. I know I cannot ship parts with the parts labeled with this new part number without submitting a PPAP to the new number which I understand and I am good with. My question is my customer told me to replace the old part number with the new one on the PSW and resubmit. Can I do that or do I need to include the old part number somewhere on the PSW as well? Am I required to tie this new part number listed on my PSW to the part print that does not reference this number or any changes to the part number? I already use the Org. Part number line to reference our internal part numbers so that our internal documentation ties in to the customer number so I do not want to replace our internal part number with their old one. Also a note on the print states that the part number is to be engraved in the part (it does not show the actual part number, just the note that says it needs to be there) and the old part number that is listed as the part number on the print is what is engraved on it. Does that mean on the Dimensional Report I have to list this as a FAIL now since the engraved part number is not the number we will actually be shipping it under?
I am not sure what the AIAG and ISO/TS rules are for this situation and I do not want to leave myself open for a NC so I am hoping that one of you quality gods can help point me in the right direction. Thanks in advance for your help!!
We PPAP'd and received approval on a part in 2014. We have only ran that part that one time in 2013 and have not ran or shipped parts since. The customer has now placed an order for that part however they had internally changed the part number which we found out when they sent out the latest releases. They did not provide us with a new or updated print with this part number included on it they just issued a new PO with both part numbers listed on it. I know I cannot ship parts with the parts labeled with this new part number without submitting a PPAP to the new number which I understand and I am good with. My question is my customer told me to replace the old part number with the new one on the PSW and resubmit. Can I do that or do I need to include the old part number somewhere on the PSW as well? Am I required to tie this new part number listed on my PSW to the part print that does not reference this number or any changes to the part number? I already use the Org. Part number line to reference our internal part numbers so that our internal documentation ties in to the customer number so I do not want to replace our internal part number with their old one. Also a note on the print states that the part number is to be engraved in the part (it does not show the actual part number, just the note that says it needs to be there) and the old part number that is listed as the part number on the print is what is engraved on it. Does that mean on the Dimensional Report I have to list this as a FAIL now since the engraved part number is not the number we will actually be shipping it under?
I am not sure what the AIAG and ISO/TS rules are for this situation and I do not want to leave myself open for a NC so I am hoping that one of you quality gods can help point me in the right direction. Thanks in advance for your help!!